PREPARTION
zNever operate the tractor and mower until you have read and completely understand this manual, the Tractor Operator’s Manual, and each of the safety messages found on the safety signs on the tractor and mower.
zPersonal protection equipment including hardhat, safety glasses, safety shoes, and gloves are recommended during assembly, installation, operation, adjustment, maintenance, re- pairing, removal, or moving the implement. Do not allow long hair, loose fitting clothing, or jewelry to be around equipment.
zPROLONGED EXPOSURE TO LOUD NOISE MAY CAUSE PERMANENT HEARING LOSS! Tractors with or without mowers attached can often be noisy enough to cause permanent, partial hearing loss. We recommend that you wear hearing protection on a
zOperate the mower only with a tractor equipped with an approved
zClear area to be cut of stones, branches or other debris that might be thrown, causing injury or damage.
zOperate only in daylight or good artificial light.
zEnsure mower is properly mounted, adjusted and in good operating condition.
zEnsure that all safety shielding and safety signs are properly installed and in good condi- tion.
STARTING AND STOPPING SAFETY
zCheck the tractor master shield over the PTO stub shaft. Make sure it is in good condi- tion and fastened securely to the tractor. Purchase a new shield if old shield is damaged or missing.
zAll tractors that are not equipped with a “live” power takeoff (PTO) need to be equipped with an
zMower operating power is supplied from tractor PTO. Refer to your tractor manual for PTO engagement and disengagement instructions. Know how to stop tractor and mower quickly in case of an emergency.
zWhen engaging PTO, the engine RPM should always be at idle speed. Once engaged and ready to start cutting, raise PTO speed to 540 RPM and maintain throughout cutting operation.
12