ATTACHING TO TRACTOR continued....

STEP 5 Place and hold inner PTO shaft section next to outer section and check if PTO shaft is too long. Each section should end approximately 3 inches short of reaching u-joint shield on the opposite section. If the shaft is too long measure 3 inches back from each u -joint shield and mark the other shaft section. Be sure to do this for both PTO shaft halves. NOTE: Do not cut PTO shaft sections at this time.

STEP 6

Raise rotary mower and remove blocking. Raise and lower rotary mower in or- der to locate the longest distance between equipment input shaft and the tractor PTO output shaft. With the rotary mower in the longest distance position, shut down the tractor and SECURELY BLOCK THE ROTARY MOWER IN POSI- TION.

STEP 7

As in step 5 hold PTO shaft sections together and check for a minimum of 6 inches of overlap. If PTO shaft has been marked for cutting the overlap is the distance measured between the two marks. If the PTO shaft has less than a 6 inch overlap, DO NOT USE. Contact your authorized King Kutter Dealer.

NOTE

If the PTO shaft length is too long go to SIZING PTO SHAFT (page 19)

STEP 8

Apply any multi-purpose grease to the outside of the male (inner) PTO shaft section. Assemble PTO shaft and install on rotary mower and tractor.

NOTE: If you shear the bolt that attaches the PTO shaft to the gear box replace with a grade 2 bolt only . Replacement with another grade of bolt will void your war- ranty and may cause terminal damage to the PTO shaft, gearbox, or tractor. (King Kutter shear pin 5 pack part #500101)

WARNING - Failure to install retaining clip on gearbox input shaft would allow driveline to swing freely if bolt is sheared causing possible injury or death.

STEP 9

Pull on tractor side of PTO shaft yoke to be sure it has locked in place. Make certain PTO shaft shielding is in place and good working condition.

STEP 10

The PTO shaft shield is a non-rotating design and must be secured prior to equipment use. Using the chain on each yoke shield attach to a fixed object on the tractor and equipment ends that will not allow the PTO shaft shield to rotate during operation.

18

Page 17 Page 19
Page 18
Image 18
King Kutter Part No 999993 manual Attaching to Tractor
Page 17 Page 19

Part No 999993 specifications

The King Kutter Part No 999993 is a robust implement designed for a variety of agricultural applications. It has gained appreciation among landowners, farmers, and lawn care professionals alike for its reliability and efficiency. This part is known for its innovative features that enhance performance, durability, and ease of use.

One of the main features of the King Kutter 999993 is its heavy-duty construction. Made from high-quality materials, the implement is designed to withstand rigorous conditions and heavy workloads. This durability ensures that it can handle various terrains, whether smooth or rocky, without compromising performance. The robust design also means that it boasts a longer lifespan, providing significant value for investment over time.

Technological advancements integrated into the design of the King Kutter 999993 include precision engineering that optimizes its functionality. The implement is equipped with a user-friendly attachment system that allows for quick and easy installation on compatible tractors. This feature is particularly advantageous for farmers who need to switch between implements frequently, facilitating versatility in operations.

Another notable characteristic is the adjustable cutting height. This capability enables users to customize the depth of cutting based on their specific needs, making it suitable for various landscaping tasks, from mowing to land clearing. Whether you are preparing a field for planting or simply maintaining your lawn, the King Kutter 999993 adapts seamlessly to your requirements.

Safety features are also paramount in the design of this implement. The King Kutter 999993 incorporates shields and guards to protect users from debris, ensuring a safer working environment. Moreover, the implement's maneuverability makes it easier for operators to navigate tight spaces, reducing the risk of accidents.

In summary, the King Kutter Part No 999993 is a well-engineered agricultural implement that combines heavy-duty construction, user-friendly features, and advanced technologies. Its adaptability for different tasks, along with safety considerations, makes it a reliable choice for those involved in land management. With its solid reputation, the King Kutter 999993 continues to be a preferred option in the agricultural sector, delivering exceptional performance and efficiency in every use.
Top Page Image Contents