HOPPER LOADING
It is advised not to load the hopper manually but by using a lift or suitable mechanical means.
ATTENTION! The hopper must be loaded only after having hitched the spreader to a pull vehicle.
Do not drive for very long distances with a full load and do not put full bags on the material in the hopper during transport to the field or during working, in order not to overload the capacity of the machine and compress the material.
WARNING! During the operations of transport, loading and use of spreading materials, the operator must behave in compliance with the instructions on the labels of the product and in particular with the content of the sentences of risk and the precaution advices.
SPREADING OF THE MATERIAL IN THE FIELD
ATTENTION! - WARNING! The operator during the period of use, maintenance, repair, transport or storing the machine
must wear accident prevention shoes and gloves. If it is neces- sary operator must wear headset, mask and glasses.
After having hitched spreader to pulling vehicle and carried out necessary precau- tions it is now possible to begin work.
ATTENTION! Before getting off of pulling vehicle and be- fore every operation of maintenance, set the parking brake, turn off the engine and remove ignition key and wait until all moving parts have completely stopped.
Engage the axle with the pin, so so that the spreader can be set in action by the turning wheels, only when you are ready to start spreading.
18
