Serial Interface Configuration

4.Click Apply to configure the Management IP Address, Subnet Mask, and Default Gateway on the Switch. The IP Address Configuration Utility display disappears.

When the Switch has completed updating its configuration with the Management IP Address, Subnet Mask, and optional Default Gateway, your default Web browser will automatically open to the Bay Networks Extranet Switch Welcome display.

5.Click Close to shut down the IP Address Configuration Utility.

NOTE: Before moving the Switch from one network to another, change the Management IP Address, subnet mask, and default gateway. Otherwise, you will need to follow the Serial Interface Configuration procedure to access your Switch because it will not be accessible from a Web browser with an invalid address.

NOTE: Bay Networks recommends that you use the IP Address Configuration Utility (refer to page 12) to provide the Switch with its initial IP configuration information.

Alternatively, you can use this procedure to access the Switch via the Serial Interface of your PC. Typically the Serial Interface configuration procedure is only necessary in a system recovery situation. The Serial Interface allows you to give the Switch a Management IP Address, Subnet Mask, and Gateway IP Address so that you can use a Web browser for management.

Prerequisites

The terminal emulator on your PC must use the following communications parameters:

∙9600 Baud

∙8 Data bits

∙1 Stop bit

∙No Parity

∙No Flow Control

14	Assigning a System Identity

2000 specifications

Kingston Technology, founded in 1987, has established itself as a leading manufacturer of memory and storage solutions. Among its cutting-edge offerings is the Kingston Technology 2000 series, a range designed to meet the growing demands for high-performance memory modules and storage solutions.

The Kingston Technology 2000 series primarily focuses on delivering enhanced speed, reliability, and efficiency for gaming, content creation, and other memory-intensive applications. One of the standout features of the Kingston 2000 series is its support for DDR4 memory technology, providing data transfer rates significantly higher than previous generations. With speeds reaching up to 3200MHz, users experience smoother multitasking and quicker loading times in games and applications.

In terms of design, Kingston's 2000 series incorporates a sleek aesthetic with customizable RGB lighting. This allows users to match their hardware setup with personalized lighting effects, adding a visual representation of performance. The heat spreaders on many modules also improve thermal management, ensuring that the memory operates at optimal temperatures, thus maintaining system stability and longevity.

Another critical characteristic of the Kingston Technology 2000 series is its compatibility with a wide range of motherboards. Designed to adhere to industry standards, these modules can easily slot into systems from various manufacturers, simplifying upgrades and replacements. Additionally, the Kingston 2000 range is known for its exceptional reliability, supported by rigorous testing and a limited lifetime warranty that provides peace of mind for users.

Incorporating advanced technologies, Kingston has implemented error-correcting code (ECC) in some of their models, enhancing the integrity of data by detecting and correcting common data corruption issues. This is particularly beneficial for workstation users who rely on accurate data processing for critical tasks.

Overall, Kingston Technology 2000 stands out as a robust solution for anyone looking to elevate their computing experience. With high speeds, stylish designs, and reliable performance, this series exemplifies Kingston's commitment to innovation in the memory and storage market. Whether for gaming, professional work, or everyday computing, Kingston Technology 2000 provides the essential tools to enhance productivity and enjoyment.

Kingston Technology 2000 manual Serial Interface Configuration, Prerequisites

Models: 2000