KiSS Networked Entertainment DP-1100 How to connect my player, Video connection, Audio connection

3 How to connect my player

We recommend connecting your player to your television using the SCART cable that comes with your player. The SCART cable is the biggest cable with the large connectors in the ends. Connect the power cable to the power connector.

If your television does not have a SCART connector, you will have to connect both audio and video with separate cables.

For connecting video, you have the following options:

•VIDEO (composite video)

•S-VIDEO (or “super-VHS”, provides a better quality than VIDEO)

•COMPONENT VIDEO (provides an even better quality than the above)

After connecting the video, you will have to connect the audio. You can connect the audio to either the television or your HiFi set. The DP-1100 outputs both analog and digital audio. Analog audio is the most common format, and is supported by most devices. Digital audio is more common on high-end equipment and surround amplifiers.

For connecting the audio, you have the following options:

•Connect ANALOG AUDIO OUT to your television using phono (RCA) jacks

•Connect ANALOG AUDIO OUT to your HiFi stereo using phono (RCA) jacks

•Connect COAXIAL or OPTICAL digital audio to your HiFi stereo

Video connection

Connecting your KiSS DP-1100 DVD player to your TV can be done using any of the cables below. (Only one cable can be connected at a time)

1	RGB via SCART
2	S-Video (the cable is an extra accessory)
3	Composite via SCART
4	Composite Video	KiSS DP-1100	TV
5	Component SCART (the cable is an extra accessory)

1 3 5 4 2

Audio connection

Connecting your KiSS DP-1100 DVD player to your amplifier can be done using any of the cables below. (Only one cable can be connected at a time)

1 Analog Stereo

2 Coaxial Output (the cable is an extra accessory)

3 Optical Output (the cable is an extra accessory)

KiSS DP-1100

Amplifier

1 2 3

- Extra information is also available from www.kiss-technology.com

9