2.Use the leveling bolts to adjust the leveling legs until the refrigerator is level from left to right.

1

1

2

2

1.Rear leveling bolt

2.Front level bolt

3.Place the level(s) on shelf or shelves as shown. Check to see whether the refrigerator is level from front to back.

4.Use the leveling bolts to adjust the leveling legs until the refrigerator is level from front to back.

5.Be sure that all four leveling legs contact the floor and support the full weight of the refrigerator.

6.Make final check to ensure the refrigerator is level.

Adjust Doors

Door Alignment

Use the following steps to adjust door alignment if doors need to be adjusted left, right, in or out.

1.Inspect spacing of the gap between the freezer door and the refrigerator door. Make sure the spacing between the doors is the same distance at the top and the bottom.

1

1.Uneven door gap

2.If the door gap is uneven, the side trim must be removed to see the entire door gasket liner. Remove the six Phillips screws holding side trim.

3.Loosen the four T27 flat-head mounting screws on top of both hinges. Loosen the two ¹⁄₄ in. hex-head mounting screws. Loosen screws to the point that the hinge is movable, but there is friction when trying to move the hinge.

1.T27 6-point drive flat-head mounting screws

2.¹⁄₄ in. hex-head mounting screws

4.Adjust the hinges so that the door gap is the same distance at the top as it is at the bottom. The bottom distance should be used as the template for the top.

5.Check the side door gasket gap. Make sure that the distance is the same at the top and the bottom. Adjust the hinges, if necessary.

6.Recheck the front door gap spacing to ensure it is still aligned and even.

7.Tighten down the mounting screws on both hinges.

8.Reinstall the side door trims.

Door Height Adjustment

Use the following steps to adjust the door height, up or down, after the doors have been leveled.

1.Open the freezer or refrigerator door and locate the hinge assembly at the bottom of the door needing to be adjusted.

1.Locking plate

2.Door stop screw

3.Bushing

2.Remove the door stop screw from the bottom door hinge using the Allen wrench. Remove locking plate as shown.

3.Turn the bushing located underneath the bottom of the hinge using the open-end wrench. Turning the bushing to the left (counterclockwise) will raise the door. Turning the bushing right (clockwise) will lower the door.

4.After adjusting, check the doors to make sure they are even at the top and bottom. If the doors are not even, continue to turn the bushing to adjust the door height.

5.Replace the locking plate.

6.Turn the bushing slightly to align the hinge and locking plate screw holes.

17

Page 16 Page 18
Page 17
Image 17
KitchenAid 2266877 manual Adjust Doors, Door Alignment, Door Height Adjustment
Page 16 Page 18

2266877 specifications

The KitchenAid 2266877 is an essential kitchen appliance that epitomizes convenience, durability, and style. As part of KitchenAid’s renowned lineup, this model is designed to cater to both amateur cooks and seasoned chefs. One of its standout features is the robust motor that ensures efficient mixing and kneading, while maintaining a quiet operation. This powerful motor is complemented by a range of speed settings, allowing users to choose the perfect speed for various tasks, from whipping egg whites to kneading pizza dough.

The construction of the KitchenAid 2266877 is marked by its high-quality materials. The body is crafted from sturdy metal, ensuring longevity and stability during use. Additionally, the mixer’s sleek design makes it an attractive addition to any kitchen countertop. Available in multiple colors, it can easily match different aesthetic preferences, making it as much a decorative piece as a functional appliance.

In terms of technologies, the KitchenAid 2266877 boasts an innovative planetary mixing action. This means that the mixing attachment moves in one direction while the bowl rotates in the opposite direction, ensuring that all ingredients are mixed thoroughly without any manual intervention. This feature is particularly useful for baking, as it promotes an even consistency and reduces the risk of lumps in the mixture.

The appliance comes equipped with different attachments that enhance its versatility. The standard wire whip, flat beater, and dough hook allow users to tackle a wide range of recipes, from delicate meringues to robust bread doughs. Its compatibility with additional attachments like pasta makers and food grinders further expands its functional utility, making it a valuable investment for anyone who enjoys cooking or baking.

Another remarkable characteristic of the KitchenAid 2266877 is its easy-to-use control panel. The intuitive design enables users to adjust speeds and settings effortlessly. Additionally, it features a tilt-head design, allowing for easy access to the bowl and attachments for quick installation and cleaning.

In conclusion, the KitchenAid 2266877 stands out for its powerful performance, durable construction, and versatile capabilities. This mixer is ideal for anyone looking to elevate their culinary skills while enjoying the convenience of a high-quality kitchen appliance. Its combination of technology, functionality, and style makes it a must-have for any kitchen enthusiast.
Top Page Image Contents