PRODUCT DATA SHEETS

Base Grille Water Filtration System

Model WF-L200V Capacity 200 Gallons (757 Liters)

Model WF-NL120V Capacity 120 Gallons (454 Liters)

System tested and certified by NSF International against NSF/ANSI Standard 53 for the reduction of Lead, Mercury, Benzene, p-dichlorobenzene, O-Dichlorobenzene, Toxaphene, Ethyl Benzene, 1,2,4-trichlorobenzene and against NSF/ANSI Standard 42 for the reduction of Chlorine Taste and Odor and Particulate Class III.

This system has been tested according to ANSI/NSF 42/53 for the reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in ANSI/NSF 42/53.

Substance Reduction

NSF Reduction

Average

Influent Challenge

Maximum

Average

Minimum%

Average%

Aesthetic Effects

Requirements

Influent

Concentration

Effluent

Effluent

Reduction

Reduction

 

 

 

 

 

 

 

 

Chlorine Taste/Odor

50%

1.9 mg/L

2.0 mg/L ± 10%

0.07 mg/L

0.06 mg/L

>75%

>75%

Particulate Class lll*

85%

49333/mL

At least 10,000 particles/mL

640/mL**

312/mL

98.7%

99.0%

 

 

 

 

 

 

 

 

Contaminant

NSF Reduction

Average

Influent Challenge

Maximum

Average

Minimum%

Average%

Reduction

Requirements

Influent

Concentration

Effluent

Effluent

Reduction

Reduction

 

 

 

 

 

 

 

 

Lead:@ pH 6.5

0.01mg/L

0.14 mg/L

0.15 mg/L ± 10%

0.0014 mg/L

0.0011 mg/L

99.00%

99.21%

Lead: @ pH 8.5

0.01mg /L

0.15 mg/L

0.15 mg /L ± 10%

0.0069 mg/L

0.0042 mg/L

95.40%%

97.20%

 

 

 

 

 

 

 

 

Mercury: @ pH 6.5

0.002 mg/L

0.0059 mg/L

0.006 mg/L ± 10%

0.0009 mg/L

0.0004 mg/L

84.74%

93.22%

Mercury: @ pH 8.5

0.002 mg/L

0.0054 mg/L

0.006 mg /L ± 10%

0.0007mg /L

0.00043 mg/L

87.03%

92.03%

 

 

 

 

 

 

 

 

Benzene

0.005 mg/L

0.0157 mg/L

0.015 mg/L ± 10%

0.002 mg/L

0.00083 mg/L

87.26%

94.71%

 

 

 

 

 

 

 

 

p-dichlorobenzene

0.075 mg/L

0.210 mg/L

0.225 mg/L ± 10%

0.0005 mg/L

0.0005 mg/L

99.76%

99.76%

 

 

 

 

 

 

 

 

O-Dichlorobenzene

0.60

1.84

1.8 ± 10%

0.20

0.0418

89.13

97.73

 

 

 

 

 

 

 

 

Toxaphene

0.003

0.0143

0.015 ± 10%

0.0012

0.0010

91.60

93.00

 

 

 

 

 

 

 

 

Ethyl Benzene

0.70

2.00

2.1 ± 10%

0.40

0.085

80.00

95.75

 

 

 

 

 

 

 

 

1,2,4- trichlorobenzene

0.07

0.232

0.21 ± 10%

0.0041

0.0016

98.23

99.31

 

 

 

 

 

 

 

 

Test Parameters: pH = 7.5 ± 0.5 unless otherwise noted. Flow = 0.5 gpm (1.9 Lpm). Pressure = 60 psig (413.7 kPa). Temp. = 63°F (17.2°C).

It is essential that operational, maintenance, and filter replacement requirements be carried out for the product to perform as advertised.

Model WF-L200V:The filter monitor system measures the amount of water that passes through the filter and alerts you to replace the filter. When 90% of the filter’s rated life is used, the filter indicator light changes from green to yellow. When 100% of the filter’s rated life is used, the filter indicator light changes from yellow to red, and it is recommended that you replace the filter. Use replacement cartridge L200V /NL120V, part #4396701. 2005 suggested retail price of $32.99 U.S.A./ $49.99 Canada. Prices are subject to change without notice.

Model WF-NL120V:Change the water filter cartridge every 6- 9 months. Use replacement cartridge L200V / NL120V, part #4396701. 2005 suggested retail price of $32.99 U.S.A./ $49.99 Canada. Prices are subject to change without notice.

The product is for cold water use only.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

Refer to the front cover or “Accessories” section for the Manufacturer’s name, address and telephone number.

Refer to the “Warranty” section for the Manufacturer’s limited warranty.

Application Guidelines/Water Supply Parameters

Water Supply

City or Well

Water Pressure

30 - 120 psi (207 - 827 kPa)

Water Temperature

33° - 100°F (0.6° - 37.8°C)

Service Flow Rate

0.5 GPM (1.9 L/min.) @ 60 psi.

*Class Ill particle size: > 5 to < 15 um

**Test requirement is at least 100,000 particles/mL of AC Fine Test Dust.

These contaminants are not necessarily in your water supply. Performance may vary based on local water conditions.

®NSF is a registered trademark of NSF International.

17

Page 17
Image 17
KitchenAid 2302428 warranty Product Data Sheets, 15 mg/L †, Application Guidelines/Water Supply Parameters

2302428 specifications

The KitchenAid 2302428 is a versatile and powerful kitchen appliance that promises to enhance your cooking experience. Known for its robust construction and innovative features, this mixer has become a favorite among both home chefs and culinary enthusiasts.

One of the standout features of the KitchenAid 2302428 is its powerful motor. With a horsepower strong enough to handle a variety of tasks, this mixer can effortlessly mix, knead, and whip, making it an ideal tool for baking bread, preparing cookie dough, or mixing heavy batters. The motor is designed to provide consistent speed and performance, ensuring that your ingredients are thoroughly combined every time.

A key characteristic of the KitchenAid 2302428 is its planetary mixing action. This technology allows the mixing attachment to rotate in one direction while the bowl spins in the opposite direction. This unique movement ensures that all ingredients are incorporated evenly, reducing the need for manual scraping or stirring. With multiple speed settings, users can easily adjust the mixer’s intensity, catering to everything from gentle folding of ingredients to high-speed whipping of egg whites.

The design of the KitchenAid 2302428 is both stylish and functional. Its sturdy construction promises durability, while the classic design makes it an attractive addition to any kitchen. The mixer is also equipped with a large capacity bowl, allowing users to prepare larger quantities at once, which is especially helpful during meal prep or when entertaining guests.

Another feature that sets this mixer apart is its versatility. It comes with a variety of attachments, including a flat beater, dough hook, and wire whip, giving users the flexibility to tackle a wide range of culinary tasks. Moreover, the KitchenAid 2302428 is compatible with additional accessories that can transform it into a food processor or pasta maker, further extending its utility in the kitchen.

In terms of safety and convenience, the KitchenAid 2302428 includes a tilt-head design for easy access to the bowl and attachments. Its non-slip feet ensure stability during operation, reducing the risk of spills or accidents. The easy-to-clean surfaces also allow for quick maintenance, ensuring that users can spend more time enjoying their creations rather than cleaning up.

In conclusion, the KitchenAid 2302428 stands out as a powerful, versatile, and stylish kitchen mixer. With its robust features, innovative technologies, and thoughtful design, it offers an optimal blending experience, making it an essential tool for any kitchen. Whether you're a casual cook or a passionate baker, this mixer is sure to elevate your culinary adventures.