Assembling Your Blender
6.Coil the power cord into the storage area on the bottom of the power base to shorten.
rewoP ltraU
7. Place jar on power base.
ml | liters |
1000 | 1 |
| |
| 3 |
750 | 4 |
| |
| 1 |
500 | 2 |
| |
| 1 |
250 | 4 |
|
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Failure to follow these instructions can result in death, fire or electrical shock.
8.Plug power cord into a grounded
9.Before removing the jar from the base after use, always push the OFF pad and make sure the blinking red light is off, then unplug. Lift the jar straight up, with the collar attached, do not twist. Do not unscrew the glass jar from the collar until you are ready to remove the blade assembly. Loosening the collar with liquids inside the jar will cause them to leak out.
Control
Stir
|
|
| fy |
| Mix | Lique | |
| TOOPERATE | ||
| LIGHT | INDICATESREESADY | |
| HBLAD | e | |
:FLASHING NOTTOUC | |||
WARNING | DO | On | Puls |
Off |
| Speeds | |
|
| ||
|
| hingAll | |
| IceCrus |
| |
ml | liters |
1000 | 1 |
| |
| 3 |
750 | 4 |
|
Ultra
Power
| 1 |
500 | 2 |
| |
| 1 |
250 | 4 |
|
8
