KitchenAid 3 Speed Classic Blender manual Ingredient Cap, Step Start Feature

To Operate Your Blender

Ingredient Cap

Remove cap and add ingredients at STIR or MIX speeds. When operating at higher speeds, with a full jar or with hot contents, stop blender and add ingredients.

60 ml	2 liters
30 ml	1 liters

Step Start® Feature

Step Start® feature automatically starts the blender at a lower speed to prevent splattering then quickly increases to the selected speed for optimal performance.

Pulse Feature

Your KitchenAid® blender has a “Pulse At Any Speed” feature.

•Before operating the blender, make sure the jar is properly assembled (see page 7) and in place on the blender base. Put ingredients into blender jar and attach lid firmly.

•Press the ON pad. The red indicator light should be blinking, showing that the blender is activated.

•Press the PULSE pad. The indicator light above the pad will glow, indicating that all the speed pads are in the Pulse mode.

				Mix			Liquefy
							TOOPERAT
							E
	Stir				ESREADY
C				TINDICAT		DES
o			GLIGH		CHBLA		lse
n		HIN		TOU
tro		:FLAS	ONOT
l		WARNING	D		On		Pu
		Off				AllSpeeds
				IceCrushing

ml	lilitters
1000	1
750	33
	44
500	11
	22
250	11
	44

Liquefy

Mix

Stir	Pulse
Control
Off	On
	AllSpeeds
	IceCrushing

•Select a speed pad and press for the desired length of time (a short delay reaching the selected speed is normal due to the Step Start® feature).

•To turn the Pulse feature off, just press the PULSE pad again. The blender is now ready for continuous operation. Before removing the blender jar, deactivate the blender by pressing the OFF pad and unplugging the power cord.

			Mix	Liquefy
				TOOPERAT
				E
	Stir		ESREADY
C			TINDICAT	DES
o		GLIGH UCHBLA
l	WARNING	DO		Pulse
ntro	:FLASHIN		NOTTO
	Off		On	s
				AllSpeed
			IceCrushing

NOTE: Use a rubber spatula to mix ingredients ONLY when the blender is OFF and unplugged. Never use any utensil, including spatulas, in the blender jar while the motor is running.

10