Burr Grinder Features
Motor Housing
Bean Hopper
198 g capacity bean hopper unscrews from the motor housing for simple cleaning.
Coffee Bin
Coffee bin is glass to minimize the static “cling” of coffee grinds. Bin is
Bin Platform
Platform pad seats the coffee bin under the grinding spout.
Bin Seal Plate
Plate helps position the coffee bin under the grinding spout and prevents coffee grinds from escaping.
Grind Control Dial
Large,
Grind Level Ring
Metal ring displays grind levels 1 (coarse) through 8 (fine).
On/Off Switch
Switch “I” to grind, “O” to stop.
Faceplate Assembly & Screws
Assembly includes the grind control dial and grind level ring. Two faceplate screws attach the faceplate assembly to the motor housing. Loosen the screws and remove the faceplate assembly to access the burrs.
Precision Stainless Steel
Cutting Burrs
Large 5.72 cm diameter flat cutting burrs provide long life and superb grind consistency. Burrs can be adjusted to compensate for wear, or calibrated to meet stringent grind- size specifications for espresso and French Press grinds.
Low-RPM Operation
A special DC motor and gear reduction system slows the rotation of the cutting burrs, minimizing the frictional heating of the grinds and preserving coffee flavor and aroma. The low rpm operation also reduces the static charge – and “cling” – of coffee grinds.
Power Cord with Tie
Round cord has no
One-Piece Metal Base with No-Slip Rubber Feet
Metal base provides a stable platform for the grinder. Rubber feet dampen noise and vibration, and help protect the countertop.
Burr Cleaning Brush
Dense bristles sweep grinds from the cutting burrs quickly and easily.
Coffee Scoop
One level scoop holds 7 g of coffee, just the right amount for a single cup (30 ml) of espresso.
English
7
