Setting Up Your Hand Mixer
CD
Paired accessories (Turbo beaters, dough hooks) include one accessory with a collar (D), and one without (C). Single accessories come with a collar (D) (mixing rod) or without (C) (whisk).
B
D
2 Insert the accessory shaft with the collar
(D)into the larger opening (B) of the Hand Mixer. Align the flanges on the shaft with the slots in the opening. Push to lock into place.
A
B
NOTE: An accessory shaft without a collar may be used in either opening (A or B). Those with a collar may only be used in the larger opening (B).
3 | Insert the accessory without a collar (C) |
into the smaller opening (A). Align and |
push to lock into place.
Removing the accessories
1 | If the Hand Mixer is running, stop the |
Hand Mixer by sliding the Power switch |
to the “O” (Off) position. Unplug the Hand Mixer from the electrical outlet.
2 | Press the ejector button to release |
the accessories from the Hand Mixer, |
then remove them.
10
W10466753A_ENv7.indd 10
2/22/13 10:03 AM 
