5
English
Preparing the Blender for Use
Before First Use
Before using your Blender for the first time,
wipe Blender base with a warm sudsy
cloth, then wipe clean with a damp cloth.
Dry with a soft cloth. Wash pitcher, lid,
locking collar and blade assembly, sealing
ring and ingredient cup in warm, sudsy
water (see Care and Cleaning, page 10).
Rinse parts and wipe dry.
Blender Assembly
1. Put locking collar with blade assembly
pointing up on a sturdy surface.
2. Put sealing ring, flat side down, around
the blades and into the groove within
the locking collar.
3. Align the pitcher tabs with the slots of
the locking collar.
4. Press down and rotate pitcher
clockwise, approximately ΒΌ turn until
two clicks are heard.
5. Adjust the length of the Blender
power cord.
6. Put pitcher assembly onto the
Blender base.
Sealing
Ring
Locking
Collar
Continued on next page