Windsor CDT7, 10080220 manual Frame Assembly, Part No

FRAME ASSEMBLY

REF	PART NO.	PART NO.	QTY	DESCRIPTION	SERIAL NO.	NOTES:
					FROM
1		OPEN	-	-
2	86003620	34341	1	FRAME, CLP FAMILY
3	86004340	39528	1	HOSE ASM, 1.5 BLK VAC X 15.5
4	86001660	41236	2	HUBCAP, 5/8” SHAFT
5	86004480	41353	1	HARNESS, MAIN, CDT
6	86239610	41354	1	HINGE, TANK TO FRAME
7	86026150	53640	1	MOTOR ASM, BRUSH CLP FAMILY
8	86005640	57030	2	NUT, 10-32 HEX NYLOCK
9	86005810	57245	3	NUT, 1/4-20 HEX NYLOCK SS
10	86198530	99809	2	FOAM TAPE, 1/8 THK X 3/4 1SDA
11	86249430	62761	1	PLATE, BRUSH MTR CLAMP	100046610
12	86006020	64099	1	PULLEY, 1.4 OD, 6GR, MICRO-V
13	86250130	66282	6	PLUG, HOLE, .375” BLK
14	86250140	66288	2	PLUG, 9/16 OD BLK NYLON
15	86006580	70085	2	SCR, 1/4-20 X 1/2 PPHMS SS
16	86273980	70066	2	SCR, 10-32 X 3/4 PPHMS
17		OPEN	-	-
18	86010630	87013	2	WASHER, 1/4 ID X 5/8 OD SS
19	86010660	87025	2	WASHER, 1/4 LOCK EXT STAR SS
20	86010650	87018	2	WASHER, #10 X 9/16 OD
21	86006550	70074	2	SET SCR, 10-32 X 1/4 KCP
22	86256190	73197	1	STRAIN RELIEF, 90 DEGREE
23		OPEN	-	-
24	86259960	89506	2	WHEEL, 1-15/16 X 10” HOOSIER
25	86066230	03107	1	AXLE, 5/8 X 17.06L
26	86134490	99667	10”	HEAT SHRINK, 3/4 ID UL/CSA
27	86253090	73943	1	SEAL, FRAME/TANK
28	86002370	20035	1	CLAMP, 7/16 DIA NYLON UL
29	86233140	20041	1	CLAMP, 2.0” WORM GEAR
30	86274760	70271	2	SCR, 1/4-20 X ½ HHCS PLTD
31	86006530	70057	2	SCR, 1/4-20 X 1 PPHMS SS
32	86272160	66052	1	PIN, ROLL 1/8” X 1.0”L
33	86276610	70697	1	SCR, 1/4-20 X 1.25 PPHMS SS
34	86005710	57105	3	NUT, 1/4-20 HEX W/ STAR WASHER

CADET 86038220 03/16/07 5-2