Installing the grille or griddle.
Grille installation: Go to Step 15.
Griddle installation: The griddle is factory installed. To complete the installation, go to Step 16.
15. Installing the grille:
log burner
A. Lift the log burner up out of the bay and set aside.
locating feet
rear spill
guard
drip tray
B. Place drip tray on bottom of grille bay and slide the tray forward so that it is located
front spill 
guard 
insert feet into slots
C. Insert the front spill guard feet into the slots in the rear spill guard as shown. The rear flange will rest on the burner box.
D. Reinstall the log burner. Make sure burner’s rear flange is seated in slot.
E. Plug power supply cord into grounded outlet.
F. Check the surface burner and grille flames. Before completing the grille installation, go to "Check the operation of the surface burners, grille and griddle" on Page 9.
slot for
locating tab 
locating
tab
G. Install the wave tray into the grille/griddle bay. The tab in the left rear corner of the bay must fit through the slot in the left rear corner of the wave tray.
wave | wave |
tray | plate |
H. Place the wave plate on the wave tray as shown. The wave plate must be centered on the wave tray.
I. Install the grille grate
16. Completing the griddle installation:
griddle
drip tray
griddle
A. Place drip tray in the well at the front of the griddle. Slide tray forward until it stops.
B. Refer to the Use and Care Guide that came with your Cooktop for instructions on cleaning and seasoning the griddle before using.
C. Plug power supply cord into grounded outlet.
D. Check the surface burner and griddle flames. Go to "Check the operation of the surface burners, grille and griddle" on Page 9.
8
