Using the Rotisserie
| rotisserie | rotisserie burner |
motor | fork | spit rod |
To avoid product damage when not using the rotisserie, remove motor and store indoors. Remove spit rod and forks. Store out of reach of children.
Lighting the rotisserie burner
For best cooking results, do not use main grill burners when using the rotisserie.
The rotisserie system is designed to cook food from the rear using intense, searing infrared heat.
1.Remove warming shelf.
2.Mount rotisserie motor on the grill’s mounting bracket. Position it securely into support bracket slots.
3.To load the spit rod, slide one of the rotisserie forks onto the spit rod with prongs facing away from handle.
4.Push spit rod through the center of the food, then slide second rotisserie fork into position.
5.Center the food and rotisserie forks on spit rod and tighten wing nuts on the rotisserie forks. If necessary, secure loose food portions with butcher’s string only.
6.Once the food is positioned on spit rod, place pointed end of rod into rotisserie motor and lower spit rod onto supports at either side of the grill.
7.Plug
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
8.Plug
1.Do not lean over the grill.
2.Push in the rotisserie burner knob and turn the knob to “LITE/HI”. You will hear the “snapping” sound of the spark.
3.When the rotisserie burner lights, continue to hold the knob in for another 10 seconds, then release the knob and burner will stay lit. You will hear the “snapping” sound of the spark until the knob is released.
IMPORTANT: If the rotisserie burner does not light immediately, turn the burner knob to “OFF”, wait 5 minutes before relighting.
Manually lighting rotisserie burner
1.Do not lean over the grill.
2.Remove the manual lighting extension from inside the drip tray.
3.Attach a match to the clip.
4. Strike the match to light it.
5.Gently hold the lit match close to the rotisserie burner.
6.Push in and turn the rotisserie burner control knob to “LITE/HI”. Hold this knob in for 10 seconds after the burner is lit. You will hear the “snapping” sound of the spark until after the knob is released.
IMPORTANT: If the rotisserie burner does not light immediately, turn the rotisserie burner control knob to “OFF” and wait 5 minutes
before relighting. | light |
7.Remove the match and replace the manual lighting extension inside the drip tray.
12
