KitchenAid KERS807SBB Wire connection Power Supply Cord, Style 2 Direct wire strain relief

Style 2: Direct wire strain relief

■Remove the knockout as needed for the flexible conduit connection.

■Assemble a UL listed conduit connector in the opening.

A

B

A. Removable retaining nut

B. Strain relief

■Feed the flexible conduit behind the black horizontal cross brace and through the strain relief, allowing enough slack to easily attach the wiring to the terminal block.

A

B

A. Black horizontal cross brace

B. Flexible conduit

■Tighten strain relief screw against the flexible conduit.

4.Complete installation following instructions for your type of electrical connection:

4-wire(recommended)

3-wire(if 4-wire is not available)

Electrical Connection Options

If your home has:	And you will be	Go to Section:
	connecting to:
4-wire receptacle	A UL listed,	4-wire connection:
(NEMA type 14-50R)	250-volt	Power supply cord
	minimum,
	40-amp, range
	power supply
	cord
4-wire direct	A fused	4-wire connection:
	disconnect or	Direct wire
5"	circuit breaker
	box
(12.7 cm)
3-wire receptacle	A UL listed,	3-wire connection:
(NEMA type 10-50R)	250-volt	Power supply cord
	minimum,
	40-amp, range
	power supply
	cord
3-wire direct	A fused	3-wire connection:
1"	disconnect or	Direct wire
(2.5 cm)	circuit breaker
	box
3"
(7.6 cm)

4-wire connection: Power Supply Cord

Use this method for:

■New branch-circuit installations (1996 NEC)

■Mobile homes

■Recreational vehicles

■In an area where local codes prohibit grounding through the neutral

1.Remove the ground-link screw from the range frame. Save the ground link screw and cup washer. Bend the ground-link away from the range so that it does not contact the range.

C

B

A

A.Ground-link screw

B.Cup washer

C.Ground-link bent away from range

2.Connect the green ground wire from the power supply cord to the range using the ground-link screw. The ground wire must be attached first and must not contact any other terminal.

10