9
Timer Set /O ff
The Timer can be set in minutes and seconds or hours and
minutes and counts down the set time.
NOTE: The Timer does not start or stop the oven.
To Se t Ti me r:
1. Press TIMER SET/OFF.
2. Press the number pads to set length of time.
3. Press TIMER SET/OFF to start the timer.
When the set time ends, timer completion tones will sound,
then reminder tones will sound approximately every
60 seconds.
4. Press TIMER SET/OFF anytime to cancel the Timer and/or
stop reminder tones.
If TIMER SET/OFF is pressed, the oven will turn off.
The time can be reset during the countdown by repeating the
above steps.
Options

Fahrenheit and Celsius

The temperature is factory preset to Fahrenheit, but can be
changed to Celsius.
1. Press OPTIONS once.
“TEMP UNIT” appears in the upper text area. “FAHRENHEIT.
Press (1) for Celsius” will scroll twice in the lower text area.
2. Press “1” to change the temperature unit setting.
“CELSIUS. Press (1) for Fahrenheit” will scroll twice from right
to left in the lower text area.
3. “CELSIUS Selected” will scroll twice from right to left in the
lower text area. The temperature units have been changed.
4. Press OFF to exit and display the time of day.

Tones

Tones are audible signals, indicating the following:

Basic Functions

One tone
■Valid keypad press
■End of Kitchen Timer (long tone)
■Function has been entered
Two t one s
■Oven is preheated
Three tones
■Invalid keypad press
Four tones
■End of cycle
Adjusting Sound On or Off
The oven sound is factory preset for On but can be changed to Off.
1. Press OPTIONS twice until “SOUND” appears in the upper
text area, and “ON. Press (1) for OFF” scrolls twice from right
to left in the lower text area.
2. Press “1” to turn the sound Off. “OFF. Press (1) for ON” will
scroll twice from right to left in the lower text area.
3. “OFF Selected” will scroll twice from right to left in the lower
text area. The sound has now been turned off.
4. Press OFF to exit and display the time of day.
Adjusting Sound Volume
The oven sound is factory preset for High but can be changed to
Low.
1. Press OPTIONS 3 times until “SOUND VOLUME” appears in
the text area, and “HIGH. Press (1) for LOW” scrolls twice
from right to left in the lower text area.
2. Press “1” to turn the sound Low. “LOW. Press (1) for HIGH”
scrolls twice from right to left in the lower text area.
3. “Low Selected” scrolls twice from right to left in the lower text
area. The sound volume has now been changed.
4. Press OFF to exit and display the time of day.
Adjusting End Tone On or Off
The end tone is factory preset for On but can be changed to Off.
1. Press OPTIONS four times until “END TONE” appears in the
upper text area, and “ON. Press (1) for OFF” scrolls twice
from right to left in the lower text area.
2. Press “1” to turn the end tone Off. “OFF. Press (1) for ON” will
scroll twice in the lower text area.
3. “OFF Selected” will scroll twice from right to left in the lower
text area. The end tone has now been turned off.
4. Press OFF to exit and display the time of day.
Adjusting Keypress Tone On or Off
The keypress tone is factory set for On but can be changed to
Off.
1. Press OPTIONS five times until “KEYPRESS TONE” appears
in the upper text area, and “ON. Press (1) for OFF” scrolls
twice from right to left in the lower text area.
2. Press “1” to turn the keypress tone Off. “OFF. Press (1) for
ON” will scroll twice in the lower text area.
3. “OFF Selected” will scroll twice from right to left in the lower
text area. The keypress tone has now been turned off.
4. Press OFF to exit and display the time of day.
Adjusting Reminder Tone On or Off
The reminder tone is factory preset for On but can be changed to
Off.
1. Press OPTIONS six times until “REMINDER TONE” appears
in the upper text area, and “ON. Press (1) for OFF” scrolls
twice from right to left in the lower text area.
2. Press “1” to turn the reminder tone Off. “OFF. Press (1) for
ON” will scroll twice in the lower text area.
3. “OFF Selected” will scroll twice from right to left in the lower
text area. The reminder tone has now been turned off.
4. Press OFF to exit and display the time of day.

Clock

The clock can be set to display time in a 12-hour or 24-hour
format. The clock is factory preset for the 12-hour format.
To Change the Clock to 24-Hour Format:
1. Press OPTIONS seven times until “12/24 HOUR” appears in
the upper text area, and “12 HR. Press(1) for 24 Hr” scrolls
twice in the lower text area.
2. Press “1” once to select 24 hour and again to select 12 hour.
3. Wait 30seconds or press OFF to accept the setting.
4. Press OFF to exit and display the time of day.

Sabbath Mode

Sabbath Mode configures the range to conform to Star-K Jewish
Sabbath requirements for a Bake cycle, including Timed Bake or
Delayed Bake functions. Refer to the “Sabbath Mode” section for
a full description of this feature.