KitchenAid KHMS 105, KHMS 106 installation instructions Grounding Instructions

Models: KHMS 105 KHMS 106

1 20
Download 20 pages 19.06 Kb
Page 5
Image 5

. ELECTRICAL SERViCE

Visual check after unpacking.

Remove all packing material from the oven cavity.

Check the oven for any damage, such as misaligned door, damaged ,gaskets around door or dents inside the oven cavity or on the door. of fhere is any damage, please do not operate the oven until it has been checked by an Authorized KitchenAid Servicer and any repairs made, if necessary.

GROUNDING INSTRUCTIONS:

This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.

WARNING - Improper use of the grounding plug can result in a risk of electric shock

If it is necessary to use an extension cord, use only a 3-wire extension cord that has a 3-blade grounding plug, and a 3-slot receptacle that will accept the plug on the appliance. The marked rating of the exten- sion cord should be AC 115-120 Volt, 15 Amp. or more.

The extension cord should be located in the cabinet above the Microwave/Hood System. It should not hang over edge of cabinet or in front of cooking surface.

Consult a qualified electrician or serviceman if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded.

The power supply cord and plug must be connected to a separate AC 120-Volt, 60 Hz, 15 or 20 Amp. branch circuit, single grounded receptacle. The receptacle should be located inside the cabinet directly

above the Microwave/Hood System mounting location.

5

Page 5
Image 5
KitchenAid KHMS 105, KHMS 106 installation instructions Grounding Instructions