KitchenAid KICU265H dimensions and 48 Island Canopy Range Hood, Product Model Numbers, KICU285H

® 36" and 48" Island Canopy Range Hood

PRODUCT MODEL NUMBERS

KICU265H

OVERALL DIMENSIONS CABINET OPENING DIMENSIONS

KICU285H

Electrical: 120-volt, 60-Hz, AC-only, 15-amp. electrical supply. Use copper wire only. A time- delay fuse or circuit breaker and separate circuit is recommended.

	10 7/8"	support
7 1/16"	(27.6 cm)
		structure
(17.9 cm)

1" (2.5 cm) min. -

11-1/8" (23.8 cm) max. upper chimney height

24-5/8" (62.5 cm) min. -

23-5/8" 34-3/4" (88.3 cm) max.

(60 cm) overall chimney height lower

chimney height

24" (61 cm) min. bottom of canopy to cooking surface

10-1/4" (26 cm) canopy height

upper chimney

lower chimney

canopy

8’ (2.4 m) min. - 9’ (2.7 m) max. ceiling to floor

23-5/8" (60 cm)	36" hood	35-3/8" (89.9 cm) or
overall depth	48" hood	47-1/4" (120 cm)

overall width

36" (91.4 cm) base cabinet height

VENTING REQUIREMENTS

Vertical roof venting

roof cap

3-1/4" x 10"

(8.3 cm x 25 cm) through

the roof

Note: 3-1/4" x 10"

(8.3 cm x 25 cm) rectangular vent must be used inside chimney cover. Round vent will not fit inside chimney cover.

The vent system length should not exceed the lengths shown in the chart below.

Vent size	Maximum length
3-1/4" x 10"	35 ft. (10.7 m)
(8.3 cm x 25 cm)
7" (17.8 cm) round	40 ft. (12.2 m)
8" (20.3 cm) round	50 ft. (15.2 m)
9" (22.9 cm) round	60 ft. (18.3 m)

3-1/4" x 10" (8.3 cm x 25 cm)

vent system

3-1/4" x 10”		wall
(8.3 cm x 25 cm)
		cap
elbow
	6 ft. (1.8 m)

2ft.

(0.6 m)

Horizontal wall venting

To calculate the length of the system you need, add the equivalent feet for each vent piece used in the system.

Vent Piece	3-1/4" x 10" (8.3 cm x 25 cm)	7" (17.8 cm), 8" (20.3 cm)
	Rectangular	or 9" (22.9 cm) Round
45° elbow	7.0 feet	2.5 feet

Maximum length		= 35 ft. (10.7 m)
1	— 90° elbow	= 5 ft. (1.5 m)
8 ft. (2.4 m) straight		=	8 ft. (2.4 m)
1	— wall cap	=	0 ft. (0 m)
Length of 3-1/4" x 10"

3-1/4" x 10"

(8.3 cm x 25 cm) through the wall

wall cap

Note: 3-1/4" x 10"

(8.3 cm x 25 cm) rectangular vent must be used inside chimney cover. Round vent will not fit inside chimney cover.

	(2.1 m)	(0.8 cm)
90° elbow	5.0 feet	5.0 feet
	(1.5 m)	(1.5 m)
90° flat elbow	12.0 feet
	(3.7 m)
transition to round	5.0 feet
	(1.5 m)
wall cap	0.0 feet
	(0.0 m)

(8.3 cm x 25 cm)
system	= 13 ft. (4 m)

Note: Flexible vent is Not recommended.

If it is used, each foot of flexible vent used is equivalent to two feet (61 cm) of straight metal vent when calculating the vent system length. (Example: A flexible elbow equals two standard elbows.)

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation	Ref. 4360369 Rev. C
Instructions packed with product. Specifications subject to change without notice.	10-15-02