To Enter Clock-Setting Mode
If the digits on the brew timer display are not flashing, enter the clock-setting mode by turning the Program-Clock Switch clockwise to the “Clock” position, then releasing. The hour digits will begin to flash.
To Set The Clock
1.Press the “–” Timer Adjustment Button to decrease the hour or the “+” Timer Adjustment Button to increase the hour. If a Timer Adjustment Button is pressed and held, the hour digits will scroll. The AM and PM icons will change when the hour digits roll past “12.” Make certain the hour set is correct with regard to AM or PM.
Timer Adjustment Buttons
2.Once the hour is set, turn the Program-Clock Switch clockwise to the “Clock” position, then release. The minute digits will begin to flash.
3.Press the “–” or “+” Timer Adjustment Buttons to adjust the minutes. If a Timer Adjustment Button is pressed and held, the minute digits will scroll.
4.Once the minutes are set, turn the Program-Clock Switch clockwise to the “Clock” position, then release. The minute digits will stop flashing and the brew timer display will exit the clock-setting mode.