3.Thread the provided nut onto the water valve as shown.
NOTE: Tighten the nut by hand. Then tighten it with a wrench two more turns. Do not overtighten.
NOTE: Adjusting the Refrigerator and Freezer Controls to a higher (colder) than recommended setting will not cool the compartments any faster.
A |
B |
Digital Controls
NOTE: The factory recommended set points are 0°F
To turn refrigerator on and view set points:
■Press and hold POWER (ON/OFF) pad for 2 seconds.
A.Bulb
B.Nut (provided)
4.Turn shutoff valve ON.
5.Check for leaks. Tighten any nuts or connections (including connections at the valve) that leak.
To view the Celsius temperatures:
■Press the °C SELECT pad. The indicator will light up. To redisplay degrees in Fahrenheit, press the °C SELECT pad again.
Complete the Installation
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
1.Plug into a grounded 3 prong outlet.
2.Flush the water system. See “Water and Ice Dispensers.”
NOTE: It may take up to 24 hours for your ice maker to begin producing ice.
REFRIGERATOR USE
Using the Controls
For your convenience, your refrigerator controls are preset at the factory. When you first install your refrigerator, make sure that the controls are still preset. The Refrigerator Control and the Freezer Control should both be set to the
IMPORTANT:
■Your product will not cool when the Refrigerator Control is set to OFF.
■The Refrigerator Control adjusts the refrigerator compartment temperature. The Freezer Control adjusts the freezer compartment temperature.
■Wait 24 hours before you put food into the refrigerator. If you add food before the refrigerator has cooled completely, your food may spoil.
NOTE: If the freezer temperature is below zero, the negative sign next to the freezer display will light up.
Adjusting Controls
The settings indicated in the previous section should be correct for normal household refrigerator usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm.
If you need to adjust temperatures in the refrigerator or freezer, press the refrigerator or freezer PLUS (+) or MINUS
CONDITION/REASON: | TEMPERATURE |
| ADJUSTMENT: |
|
|
REFRIGERATOR too cold | REFRIGERATOR |
Not set correctly for conditions | Control 1° higher |
|
|
REFRIGERATOR too warm | REFRIGERATOR |
High use or room very warm | Control 1° lower |
|
|
FREEZER too cold | FREEZER Control |
Not set correctly for conditions | 1° higher |
|
|
FREEZER too warm/too little ice | FREEZER Control |
High use or heavy ice use | 1° lower |
|
|
|
|
Additional Control Panel Features
Additional features are located on the control panel at the top of the refrigerator compartment.
Max Cool
The Max Cool feature assists with periods of heavy ice usage, full grocery loads, or temporarily warm room temperatures.
■Press MAX COOL pad to turn on the Max Cool feature. The Max Cool indicator light will remain on for 24 hours unless manually turned off.
NOTE: The temperature display will not change. After
24 hours, the refrigerator returns to the previous temperature set points.
5
