The doors are difficult to open

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

Are the gaskets dirty or sticky? Clean gaskets with mild soap and warm water.

The lights do not work

Is a light bulb loose in the socket or burned out? See “Changing the Light Bulbs.”

Is the dispenser light set to OFF? The dispenser light will operate only when the levers are pressed. If you want the dispenser light to stay on continuously, set the dispenser light to ON, or NIGHT LIGHT or AUTO or HALF or DIM. See “Water and Ice Dispensers.”

Is the dispenser light set to NIGHT LIGHT or AUTO? If the dispenser is set to the NIGHT LIGHT or AUTO mode, be sure the dispenser light sensor is not blocked. See “Water and Ice Dispensers.”

Temperature and Moisture

Temperature is too warm

New installation? Allow 24 hours following installation for the refrigerator to cool completely.

Door(s) opened often or left open? Allows warm air to enter refrigerator. Minimize door openings and keep doors fully closed.

Large load of food added? Allow several hours for refrigerator to return to normal temperature.

Controls set correctly for the surrounding conditions? Adjust the controls a setting colder. Check temperature in 24 hours. See “Using the Controls.”

There is interior moisture buildup

NOTE: Some moisture buildup is normal.

Humid room? Contributes to moisture buildup.

Door(s) opened often or left open? Allows humid air to enter refrigerator. Minimize door openings and keep doors fully closed.

Ice and Water

The ice maker is not producing ice or not enough ice

Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

Ice maker turned on? Make sure wire shutoff arm or switch (depending on model) is in the ON position.

New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

Large amount of ice recently removed? Allow 24 hours for ice maker to produce more ice.

Ice cube jammed in the ice maker ejector arm? Remove ice from the ejector arm with a plastic utensil.

Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements” in either the Installation Instruction booklet or the Use & Care Guide.

The ice cubes are hollow or small

NOTE: This is an indication of low water pressure.

Water shutoff valve not fully open? Turn the water shutoff valve fully open.

Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

Questions remain regarding water pressure? Call a licensed, qualified plumber.

Off-taste, odor or gray color in the ice

New plumbing connections? New plumbing connections can cause discolored or off-flavored ice.

Ice stored too long? Discard ice. Wash ice bin. Allow 24 hours for ice maker to make new ice.

Odor transfer from food? Use airtight, moisture proof packaging to store food.

Are there minerals (such as sulfur) in the water? A water filter may need to be installed to remove the minerals.

Is there a water filter installed on the refrigerator? Gray or dark discoloration in ice indicates that the water filtration system needs additional flushing.

13

Page 13
Image 13
KitchenAid KSRS25CNBL installation instructions Temperature and Moisture, Ice and Water

KSRS25CNBL specifications

The KitchenAid KSRS25CNBL is a standout refrigerator that combines functionality with sleek aesthetics, making it an ideal addition to any modern kitchen. With its spacious design and advanced features, this model offers both practicality and style.

One of the key features of the KitchenAid KSRS25CNBL is its large capacity. With a total storage capacity of 25 cubic feet, it provides ample space for fresh and frozen foods, allowing you to stock up on groceries without the worry of running out of room. The adjustable shelves in the refrigerator section enable you to customize the layout according to your needs, accommodating larger items such as cakes and pizzas with ease.

This refrigerator incorporates the latest in cooling technology with its Whirlpool’s Adaptive Defrost system. This feature allows for efficient energy use by only running the defrost cycle when necessary, which not only saves energy but also keeps the food fresher for a longer period. Additionally, the dual cooling system separates the refrigerator and freezer sections, ensuring that the humidity levels are ideal for fruits and vegetables while preventing freezer burn.

The KSRS25CNBL comes equipped with an external ice and water dispenser, providing quick access to refreshingly cold water and ice without the need to open the door. The dispenser also features a filter indicator, ensuring you always have clean and refreshing water on hand.

In terms of energy efficiency, this model is Energy Star certified, which means it meets strict energy efficiency guidelines. This certification not only helps you save on energy bills but also contributes to a more sustainable home.

Other notable characteristics include bright LED lighting that provides excellent visibility throughout the refrigerator, making it easy to find your favorite snacks or ingredients. The stainless steel exterior not only adds a touch of elegance to your kitchen but is also smudge-resistant, ensuring that your appliance looks pristine.

Overall, the KitchenAid KSRS25CNBL is a perfect blend of advanced technology, generous storage space, and modern design, making it a reliable choice for anyone looking to enhance their kitchen experience. Whether you are a gourmet cook or a busy family, this refrigerator is designed to meet diverse needs while keeping your food fresh and accessible.