The ice dispenser will not operate properly

 

The water dispenser will not operate properly

■If the ice storage bin is located on the door, remove the temporary shield from underneath the ice storage bin. See “Ice Maker and Storage Bin.”

■Freezer door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely.”

■Ice bin installed correctly? Be sure the ice bin is firmly in position.

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Ice stuck in the delivery chute? Use a plastic utensil to clear the delivery chute.

■Has the wrong ice been added to the bin? Use only cubes produced by the current ice maker.

■Has the ice melted around the auger (metal spiral) in the ice bin? Empty the ice container. Use warm water to melt the ice if necessary.

WARNING

Cut Hazard

Use a sturdy glass when dispensing ice.

Failure to do so can result in cuts.

■Is the ice dispenser stalling while dispensing “crushed” ice? Change the ice button from “crushed” to “cubed.” If cubed ice dispenses correctly, depress the button for “crushed” ice and begin dispensing again.

■Has the dispenser arm been held in too long? Ice will stop dispensing when the arm is held in too long. Wait 3 minutes for dispenser motor to reset before using again.

■Freezer door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely.”

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Is the water pressure at least 30 psi (207 kPa)? The water pressure to the home determines the flow from the dispenser. See “Water Supply Requirements.”

■Kink in the home water source line? Straighten the water source line.

■New installation? Flush and fill the water system.

■Water filter installed on the refrigerator? The filter may be clogged or incorrectly installed.

■Is a reverse osmosis water filtration system connected to your cold water supply? See “Water Supply Requirements” in either the Installation Instructions or the Use & Care Guide.

Water is leaking from the dispenser

NOTE: One or two drops of water after dispensing is normal.

■Glass not being held under the dispenser long enough? Hold the glass under the dispenser 2 to 3 seconds after releasing the dispenser lever.

■New installation? Flush the water system. See “Prepare the Water System” or “Water and Ice Dispensers.”

■Recently changed water filter? Flush the water system. See “Prepare the Water System” or “Water and Ice Dispensers.”

The dispenser water is not cool enough

NOTE: Water from the dispenser is chilled to only 50°F (10°C).

■New installation? Allow 24 hours after installation for the water supply to cool completely.

■Recently dispensed large amount of water? Allow 24 hours for water supply to cool completely.

■Water not been recently dispensed? The first glass of water may not be cool. Discard the first glass of water.

■Refrigerator connected to a cold water pipe? Make sure the refrigerator is connected to a cold water pipe. See “Water Supply Requirements.”

14

Page 13 Page 15
Page 14
Image 14
KitchenAid KSRS25CNBL installation instructions Water is leaking from the dispenser, Dispenser water is not cool enough
Page 13 Page 15

KSRS25CNBL specifications

The KitchenAid KSRS25CNBL is a standout refrigerator that combines functionality with sleek aesthetics, making it an ideal addition to any modern kitchen. With its spacious design and advanced features, this model offers both practicality and style.

One of the key features of the KitchenAid KSRS25CNBL is its large capacity. With a total storage capacity of 25 cubic feet, it provides ample space for fresh and frozen foods, allowing you to stock up on groceries without the worry of running out of room. The adjustable shelves in the refrigerator section enable you to customize the layout according to your needs, accommodating larger items such as cakes and pizzas with ease.

This refrigerator incorporates the latest in cooling technology with its Whirlpool’s Adaptive Defrost system. This feature allows for efficient energy use by only running the defrost cycle when necessary, which not only saves energy but also keeps the food fresher for a longer period. Additionally, the dual cooling system separates the refrigerator and freezer sections, ensuring that the humidity levels are ideal for fruits and vegetables while preventing freezer burn.

The KSRS25CNBL comes equipped with an external ice and water dispenser, providing quick access to refreshingly cold water and ice without the need to open the door. The dispenser also features a filter indicator, ensuring you always have clean and refreshing water on hand.

In terms of energy efficiency, this model is Energy Star certified, which means it meets strict energy efficiency guidelines. This certification not only helps you save on energy bills but also contributes to a more sustainable home.

Other notable characteristics include bright LED lighting that provides excellent visibility throughout the refrigerator, making it easy to find your favorite snacks or ingredients. The stainless steel exterior not only adds a touch of elegance to your kitchen but is also smudge-resistant, ensuring that your appliance looks pristine.

Overall, the KitchenAid KSRS25CNBL is a perfect blend of advanced technology, generous storage space, and modern design, making it a reliable choice for anyone looking to enhance their kitchen experience. Whether you are a gourmet cook or a busy family, this refrigerator is designed to meet diverse needs while keeping your food fresh and accessible.
Top Page Image Contents