KitchenAid KUDD01DPPA dimensions Product Model Series Overall Dimensions, Drain Options

	®	Undercounter Dishwasher
PRODUCT MODEL SERIES			OVERALL DIMENSIONS
KUDD01DPPA				23-7/16"
			22-7/16" *
			(57 cm)	(59.5 cm)
			raised tabs for
Electrical: A 120-volt, 60 Hz, AC-only, 15-amp			optional top
			attaching brackets
fused electrical supply is required. (Circuit breaker
or time-delay fuse is recommended.) It is
recommended that a separate circuit serving only						32-3/16"- 34-1/2"
this appliance be provided.			30" ***
					(81.8 cm - 87.8 cm)
The 3 prong grounded outlet must be installed			(76.2 cm)
within 6" (15.2 cm) to 18" (45.7 cm) of the cabinet
side wall.						* If custom wood panels are to be used,
If you plan to install a garbage disposer, an						the product depth is specified with an
				side		11/16" (18 mm) door panel thickness.
additional separate 120-volt, 60 Hz, AC-only,						** Toe panel depth: Factory supplied,
				attaching
15- or 20-amp fused electrical supply is required.				tabs		2– 4-3/8" (5 – 11 cm); Custom wood,
						5" (12.7 cm) less the toe panel
Water: A hot water line with 4.3-145 psi
						thickness for integrated. Minimum
						panel thickness using the supplied
(30-1000 kPa) water pressure must be used.
						screws is 3/8" (9 mm).
Water temperature must be minimum 120°F						*** Door front height: Factory supplied –
(49°C) at dishwasher. An easily accessible valve				2"– 4-3/8" **		30" (76.2 cm); Custom wood – 28-1/4"
			20-15/32"			(71.8 cm) minimum.
with 3/8" compression fitting must be installed in				(5 cm – 11 cm)
the hot water supply line.			(52 cm)			NOTE: Product shown with front panels
			drawer open			for dimension purposes.
			CABINET OPENING DIMENSIONS
			*IMPORTANT: Custom wood door panels, if
			used, may be wider than the dishwasher to
			match surrounding cabinets. The 23-5/8"
			(60.0 cm) must be increased so that there is			moisture protection tape	4"
			a 1/4" (6.4 mm) clearance between the
						(10 cm)
			cabinet side and panel edge.
			For corner installation, there must be a 1/2"
			(12.7 mm) space between the adjacent
			cabinet doors (i.e. door knobs) and open			32-5/16"– 34-5/8"
			dishwasher drawer.
						(82.0 cm – 88.0 cm)
						Utility hole:
						1-1/2" (3.8 cm) dia.
						hole, either side –
						immediately adjacent
						to corner.
DRAIN OPTIONS
	Sink drain waste		Garbage disposal			22-7/8"
drain hose	tee connection	drain hose	connection			(58.0 cm)
support		support
						23-5/8"* (60.0 cm)
				Air break connection

	waste tee
	waste
27-1/2" – 32-1/4"	water supply
(70 cm – 82 cm)

32-1/4"	82 cm)
27-1/2" –	(70 cm –

	6" (15.2 cm)
	minimum
	garbage
	disposal
valve	waste
	water supply
	8" (20.3 cm) min. bend
	radius from valve

air break

drain hose connector

waste

valve

water supply

8" (20.3 cm) min. bend radius from valve

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation	Ref. 8546448
Instructions packed with product. Specifications subject to change without notice.	12-2-04