KitchenAid KUDS01IJ manual Canceling a Cycle, Changing a Cycle or Setting

Use this cycle for china and

crystal. This cycle uses a

light wash and gentle dry.

Use main

During the heated dry, the

heating element cycles on

detergent

and off.

dispenser section.

Soil

Rinse

Main

Rinse

Purge†

Final

Dry

Time

Water

Level

Wash

Heated

(min)

Usage

Sensed

Rinse

(gal/L)

●

●

●

●

●

79*

7.1-8.6

Heavy

120°F

135°F

cycled

/27-33

(49°C)

(57°C)

●

●

●

●

●

71*

5.5/21

Light

120°F

135°F

cycled

(49°C)

(57°C)

Use this cycle for a quick wash

and light dry to cleanup

cookware prior to entertaining.

Use main

The sensor adds water and

time to the cycle, if needed, for

detergent

maximum cleaning. This cycle

dispenser

uses a shortened dry time.

section.

Towel drying may be needed.

Water

Rinse

Main

Rinse

Final

Dry

Time

Water

Temp

Wash

Heated

(min)

Usage

Sensed

Rinse

(gal/L)

Hot

●

●

●

●

44*

5.2-6.5

/20-25

Cold

●

●

●

●

●

48*

7.1-8.2/

27-31

Use this rinse cycle for

rinsing dishes, glasses, and

silverware that will not be

Do not use

washed right away.

detergent with

this cycle.

Soil

Pre-

Rinse

Main

Rinse

Final

Dry

Time

Water

Level

Wash

Wash

Heated

(min)

Usage

Sensed

Rinse

(gal/L)

●

10

1.8/7

†A small amount of water is run through the pump to remove soil particles between the main wash and final rinse.

NOTES:

■The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary from the numbers above as the sensor adjusts the cycle for the best wash performance.

■In the Normal cycle, the dishwasher pauses while soaking. Soaking helps loosen soils on dishes for brilliant results.

Canceling a Cycle

Anytime during a cycle, press

The display shows

Your dishwasher starts a 2 minute drain (if needed). Let the dishwasher drain completely. The light turns off after 2 minutes.

NOTE: If your dishwasher does not need draining, the light turns off. Select a new cycle and options.

To stop the drain

You can press Cancel/Drain again to stop the drain immediately. Remember to drain the dishwasher before starting a new cycle.

To clear the indicators

Press Cancel/Drain before starting the dishwasher to clear all options and cycles.

Changing a Cycle or Setting

During the first minute of a cycle

1.Press a new cycle and/or options.

2.Check the detergent dispensers. They must be filled properly for the new cycle.

After the first minute of a cycle

1.Press

The display shows

Your dishwasher starts a 2 minute drain (if needed). Let the dishwasher drain completely. The light turns off after 2 minutes.

NOTE: If your dishwasher does not need draining, the light turns off.

2.Check the detergent dispensers. They must be filled properly for the new cycle.

3.Close the door.

4.Press a new cycle and/or options.

5.Press Start.

13