changing the Bin Door and Lower Panels
Thermostat calibrations
If ice maker is installed more than 2,000 feet (600 m) above sea level, the Bin and Ice Thickness Thermostats must be adjusted
to a warmer setting. Disconnect electricity,
remove thermostat, and follow the directions for turning the altitude adjustment screw as shown in the label on each thermostat.
Shipboard operation
When this ice maker is installed aboard a ship, it may be necessary to purchase and install a water deflector. The deflector hangs between the lower edge of the evaporator
and the cutter grid. It keeps the water
flowing over the evaporator from spilling into the storage bin area. Order the necessary parts from your local ice maker dealer.
3
