KitchenAid KWCU465S dimensions Product Model Numbers, Product Dimensions, Venting Requirements

® 36" (76.2 cm) Range Hood

PRODUCT MODEL NUMBERS

KWCU405S

KWCU465S

PRODUCT DIMENSIONS

Vented installations

Electrical: 120-volt, 60-Hz, AC-only, 15-amp, fused electrical curcuit is required. Use copper wire only.

VENTING REQUIREMENTS

Note: Flexible vent is not recommended. Flexible vent creates back pressure and air turbulence that greatly reduce performance.

Vent system can terminate either through the roof or wall. To vent through a wall, a 90° elbow is needed.

10¹⁄₄" (26.0 cm)

11¹³⁄₁₆" (30.0 cm)

30" (76.2 cm) 36" (91.4 cm)

Min 27¹⁄₂" (69.8 cm)

Max 36¹⁄₂" (92.7 cm)

21¹⁄₄"(54.0 cm)

1¹⁄₄"

(3.2 cm)

3¹⁵⁄₁₆"

(10.0 cm)

22" (55.9 cm)

Non-vented (recirculating) installations

Roof Venting	Wall Venting	Non-vented
		(recirculating)

10⁵⁄₈" (27.0 cm)

12" (30.5 cm)

A

B

A. Roof cap

B. 6" (15.2 cm) round vent

A

B

B

A

A. Wall cap	A. Deflector
B. 6" (15.2 cm)	B. 6" (15.2 cm)
round vent	round vent

5"

(12.7 cm)

30" (76.2 cm) 36" (91.4 cm)

Min 32" (81.3 cm) Max 38¹⁄₈" (96.8 cm)

3¹⁄₂"

(8.9 cm)

22" (55.9 cm)

12¹⁄₂"

(31.8 cm) 1¹⁄₄"

(3.2 cm)

3¹⁵⁄₁₆"

(10.0 cm)

22" (55.9 cm)

INSTALLATION DIMENSIONS

To calculate the length of the system you need, add the equivalent feet (meters) for each vent piece used in the system.

Vent piece	6" (15.2 cm) round
45° elbow	2.5'
	(0.8 m)
90° elbow	5.0'
	(1.5 m)

Maximum equivalent vent length is 35' (10.7 m).

Example Vent System

	30" (76.2 cm) or 36" (91.4 cm)			Note: The range hood chimneys are
	cabinet opening width
	(if installed between cabinets)			adjustable and designed to meet varying
				ceiling or soffit heights depending on the
				distance “X” between the bottom of the
				range hood and the cooking surface. For
				higher ceilings, a 40" (101.6 cm) Chimney
				Extension Kit Part Number 8212710
				(Stainless Steel), 8212711 (White), or
				8212712 (black) is available from your
				dealer or an authorized parts distributor.
				The chimney extension replaces the upper
			See Note
				chimney shipped with the range hood.
		X*
				Important:
18" (45.7 cm) min.				Minimum distance “X”: 24” (61.0 cm)
clearance upper				Suggested maximum distance “X”: 30”
cabinet to countertop
				(76.2 cm)
				For vented installations, the chimneys can

90º elbow 6' (1.8 m)

2’Maximum length

(0.6 m)

1 — 90° elbow

8' (2.4 m) straight 1 — wall cap

system length

Wall cap

=35' (10.7 m)

=5' (1.5 m)

=8' (2.4 m)

=0' (0 m)

=13' (3.9 m)

				be adjusted for ceilings between 7' 6-3/8"
				(2.30 m) and 9' 0" (2.74 m).
36"	(91.4 cm)
countertop hei		g	ht	For non-vented (recirculating) installations,
				the chimneys can be adjusted for ceilings
				between 8' 3-3/8" (2.45 m) and 9' 5-1/4"
				(2.88 m).

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation	Ref. W10140616
Instructions packed with product. Specifications subject to change without notice.	09-11-08