Temperature and Moisture

Temperature is too warm

■New installation? Allow 24 hours following installation for the refrigerator to cool completely.

■Door(s) opened often or left open? Allows warm air to enter refrigerator. Minimize door openings and keep doors fully closed.

■Large load of food added? Allow several hours for refrigerator to return to normal temperature.

■Controls set correctly for the surrounding conditions? Adjust the controls a setting colder. Check temperature in 24 hours. See “Using the Controls.”

There is interior moisture buildup

NOTE: Some moisture buildup is normal.

■Humid room? Contributes to moisture buildup.

■Door(s) opened often or left open? Allows humid air to enter refrigerator. Minimize door openings and keep doors fully closed.

Ice and Water

The ice maker is not producing ice or not enough ice

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Ice maker turned on? Make sure wire shutoff arm or switch (depending on model) is in the ON position.

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Large amount of ice recently removed? Allow 24 hours for ice maker to produce more ice.

■Ice cube jammed in the ice maker ejector arm? Remove ice from the ejector arm with a plastic utensil.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements” in either the Installation Instruction booklet or the Use & Care Guide.

The ice cubes are hollow or small

NOTE: This is an indication of low water pressure.

■Water shutoff valve not fully open? Turn the water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

■Questions remain regarding water pressure? Call a licensed, qualified plumber.

Off-taste, odor or gray color in the ice

■New plumbing connections? New plumbing connections can cause discolored or off-flavored ice.

■Ice stored too long? Discard ice. Wash ice bin. Allow 24 hours for ice maker to make new ice.

■Odor transfer from food? Use airtight, moisture proof packaging to store food.

■Are there minerals (such as sulfur) in the water? A water filter may need to be installed to remove the minerals.

■Is there a water filter installed on the refrigerator? Gray or dark discoloration in ice indicates that the water filtration system needs additional flushing.

The ice dispenser will not operate properly

■Freezer door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely.”

■Ice bin installed correctly? Be sure the ice bin is firmly in position.

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Ice stuck in the delivery chute? Use a plastic utensil to clear the delivery chute.

■Has the wrong ice been added to the bin? Use only cubes produced by the current ice maker.

■Has the ice melted around the auger (metal spiral) in the ice bin? Empty the ice container. Use warm water to melt the ice if necessary.

WARNING

Cut Hazard

Use a sturdy glass when dispensing ice.

Failure to do so can result in cuts.

■Is the ice dispenser stalling while dispensing “crushed” ice? Change the ice button from “crushed” to “cubed.” If cubed ice dispenses correctly, depress the button for “crushed” ice and begin dispensing again.

■Has the dispenser arm been held in too long? Ice will stop dispensing when the arm is held in too long. Wait 3 minutes for dispenser motor to reset before using again.

10

Page 9 Page 11
Page 10
Image 10
KitchenAid T2WG2L installation instructions Temperature and Moisture, Ice and Water
Page 9 Page 11

T2WG2L, T2WG2 specifications

The KitchenAid T2WG2 and T2WG2L stand out in the realm of kitchen appliances, offering a combination of style, efficiency, and innovative technology. Both models are designed to elevate culinary experiences, making them essential for home cooks and culinary enthusiasts alike.

One of the standout features of the KitchenAid T2WG2 and T2WG2L is their robust construction. Made from high-quality materials, these kitchen tools are built to withstand the rigors of daily use. The T2WG2 features a durable robust design that emphasizes functionality without sacrificing aesthetics. The T2WG2L variant offers a more modern look, appealing to those who appreciate sleek and contemporary kitchen designs.

The ergonomic handle on both models ensures a comfortable grip, making them easy to maneuver during food preparation. The smooth operation of the tools reduces hand fatigue, allowing users to prepare meals effortlessly. These appliances boast a range of attachments that enhance their versatility. From beaters to dough hooks, the T2WG2 and T2WG2L cater to an array of culinary tasks, allowing users to mix, knead, and whip with ease.

Moreover, both models feature advanced design technology that promotes efficiency. The powerful motor ensures consistent performance, whether you're mixing a light batter or kneading dense dough. The planetary mixing action guarantees that all ingredients are evenly combined, leaving no stubborn pockets of unmixed ingredients.

Cleaning and maintenance are simple with the T2WG2 and T2WG2L. The removable parts are dishwasher-safe, ensuring that cleanup is a breeze after a long cooking session. This feature is particularly appealing to busy individuals who want to enjoy their cooking experience without the hassle of extensive cleanup afterward.

The T2WG2L offers additional color options, allowing users to select an appliance that complements their kitchen décor perfectly. This versatility in design and functionality makes both models an attractive choice for anyone looking to upgrade their kitchen appliances.

In summary, the KitchenAid T2WG2 and T2WG2L embody the perfect blend of power, durability, and style. With their ergonomic design, versatile attachments, and advanced mixing technology, these models are poised to redefine kitchen efficiency and enhance the overall cooking experience. Whether you’re an amateur cook or a seasoned chef, these appliances are sure to become indispensable tools in your culinary toolkit.
Top Page Image Contents