Reset Filter Alert

After 100 hours of use, “C” will appear in the range hood display. This “C” indicates that the filter must be cleaned.”C” will only appear when turning off the range hood fan.

Reset Alarm Display

1.Turn off the range hood fan and light.

2.Press the “H” button for 4 seconds. The “C” will disappear from the display and the counter will reset to “0.”

Thermal Protector

The range hood is equipped with a thermal protector to avoid overheating conditions. If the range hood shuts off while in use, press the on/off button to turn off the range hood. Wait approximately 60 minutes, then press the on/off button to restart the range hood.

RANGE HOOD CARE

Cleaning

IMPORTANT: Clean the hood and grease filters frequently according to the following instructions. Replace grease filters before operating hood.

Be sure lights are cool before cleaning the hood.

Exterior Surfaces

Clean the range hood with a mild detergent and soft cloth. Do not use abrasive cleanser or steel-wool pads.

Metal Grease Filters

The filters should be washed frequently. Place metal filters in dishwasher or hot detergent solution to clean.

Drain water and let each filter dry thoroughly before replacing it.

To Remove Metal Grease Filters

1.Turn off fan and lights. Check that halogen lamp is cool.

2.Pull out on knob and turn counterclockwise to release metal grease filters.

To Install Charcoal Filter

1.Turn fan and lights off. Check that halogen lamp is cool.

2.Remove the metal grease filters. See “Metal Grease Filters” section.

3.Set metal grease filters aside.

4.Place charcoal filter into opening. Press back and up on fixing hooks to secure filter in place.

5.Replace metal grease filters. See “Metal Grease Filters” section.

To Replace Charcoal Filter

1.Turn fan and lights off. Check that halogen lamp is cool.

2.Remove the metal grease filters. See “Metal Grease Filters” section.

3.Set metal grease filters aside.

4.Discard the used charcoal filter.

5.Place charcoal filter into opening. Press back and up on fixing hooks to secure filter in place.

6.Replace metal grease filters. See “Metal Grease Filters” section.

Replacing a Halogen Lamp

Turn off the range hood and allow the halogen lamp to cool. Replace using a tissue.

If new lamps do not operate, make sure the lamps are inserted correctly before calling service.

1.Disconnect power.

2.Remove the 2 screws holding the lighting support.

3.Gently pull the lighting support out of the range hood.

4.Remove the light from the lighting support and replace with a 12-volt, 20-watt maximum, halogen lamp made for a MR11 base.

Check that the 2 pins are properly inserted in the lamp holder socket holes.

To Replace Metal Grease Filters

1.Insert back edge of filter into rear channel of the filter opening.

2.Pull out on knob and turn counterclockwise, position front edge into place and release knob.

Charcoal Filters - For Non-Vented (recirculating) Installations

The charcoal filter is not washable nor reusable.

It should be changed every 4 months in normal use or more frequently in heavy use.

The charcoal filter captures unpleasant cooking odors.

5.Replace the lighting support.

11

Page 10 Page 12
Page 11
Image 11
KitchenAid W10029780 installation instructions Range Hood Care, Cleaning
Page 10 Page 12

W10029780 specifications

The KitchenAid W10029780 is a versatile appliance part designed specifically for use with KitchenAid appliances, ensuring efficient performance and durability in the kitchen. This part is primarily known for its compatibility with a wide range of KitchenAid refrigerators, serving as a crucial element in maintaining the appliance's functionality.

One of the standout features of the KitchenAid W10029780 is its innovative design tailored to optimize cooling performance. By facilitating effective temperature control, this part helps maintain the ideal environment for food storage, contributing to the freshness and longevity of your perishables. The unit also benefits from robust construction materials that withstand the rigors of daily kitchen use, ensuring that it remains reliable for years.

In addition to its structural integrity, the W10029780 incorporates advanced technology aimed at minimizing energy consumption. This efficiency not only supports sustainable practices but also helps users save on energy costs. The part's design includes features that promote optimal airflow within the refrigerator, preventing cold spots and ensuring that all areas receive adequate cooling.

The ease of installation is another key characteristic of the KitchenAid W10029780. Homeowners and DIY enthusiasts can replace the part without the need for professional assistance, thanks to its straightforward design. Comprehensive installation instructions accompany the product, guiding users through the replacement process with clarity.

Furthermore, the KitchenAid W10029780 is also engineered for compatibility with various models of KitchenAid refrigerators, making it a versatile choice for those looking to maintain their kitchen appliances. The part's reliability has earned it positive reviews from customers who appreciate its seamless integration into their existing kitchen setups.

In conclusion, the KitchenAid W10029780 stands out as a vital component for those looking to enhance their refrigerator's efficiency and longevity. With its emphasis on cooling performance, energy efficiency, user-friendly installation, and compatibility with various models, this part exemplifies the brand's commitment to quality and customer satisfaction. Whether you are a seasoned chef or a casual home cook, the KitchenAid W10029780 is likely to meet your appliance maintenance needs effectively.
Top Page Image Contents