Connect Water Supply Line and Drain Hoses
1. Connect water supply line to the water valve under the sink. | Option 2: No waste disposer and drain air gap |
B
A
A 
A. Hot water supply
C
2.Slide clamps onto drain hoses (Figure A). Do not cut drain hoses.
3.Push hoses into Y drain connector until fully seated (Figure B). Several “clicks” will be heard.
4.Slide clamps into position (figures C and D).
A. Drain hose connector
B. Drain air gap
C. Waste
Option 3: Waste disposer and drain air gap
A | B |
| A |
| B |
| C |
C | D |
| A. Drain hose connector |
| B. Drain air gap |
| C. Waste |
| Option 4: No waste disposer, no drain air gap |
5.Connect the drain hose using one of the following options:
Option 1: Waste disposer no drain air gap
C
A
B
A. For new construction, remove disposer plug.
B. Connect drain connector to waste disposer.
C. Tighten clamp.
A
C
B 
A. Drain hose connector
B. Cut drain connector
C. Waste
NOTE: Attach the drain hose connector to the water waste line using the supplied hose clamp.
6.Turn on water and check for leaks.
11
