Electronic Controls

For your convenience, your refrigerator and freezer controls are preset at the factory. When you first install your refrigerator, make sure the controls are still set to the recommended setting as shown.

Recommended Setting “4”

To Turn Your Refrigerator Off/On:

To turn your refrigerator off, press the freezer down arrow touch pad until a dash (-) appears in both the refrigerator and freezer displays. Neither compartment will cool.

Adjusting Electronic Controls

The temperature control range for each compartment is 1 through 7 (coldest).

Press the up or down arrow touch pads to adjust the temperature. Except when starting the refrigerator, do not adjust either control more than one setting at a time. Wait 24 hours between adjustments for the temperature to stabilize.

If you need to adjust the temperature in either the refrigerator or freezer compartment, use the settings listed in the chart below as a guide.

CONDITION/REASON:

ADJUSTMENT:

 

 

REFRIGERATOR too warm

Adjust REFRIGERATOR

 

Control one setting

 

higher

 

 

FREEZER too warm/to little ice

Adjust FREEZER

 

Control one setting

 

higher

 

 

REFRIGERATOR too cold

Adjust REFRIGERATOR

 

Control one setting

 

lower

 

 

FREEZER too cold

Adjust FREEZER

 

Control one setting

 

lower

Digital Controls

For your convenience, your temperature controls are preset at the factory. When you first install your refrigerator, make sure the controls are still set to the recommended set points as shown.

Recommended Settings

IMPORTANT: When the power is on, the temperature display shows the actual temperature of the compartment.

To Turn Your Refrigerator Off/On:

Press the freezer (+) touch pad repeatedly until “OFF” appears in the freezer display. Allow a few seconds for the refrigerator to shut off. Neither compartment will cool.

Press either the refrigerator or freezer (-) touch pad to turn on the refrigerator.

Adjusting Digital Controls

The REFRIGERATOR control adjusts the refrigerator compartment temperature. The FREEZER control adjusts the freezer compartment temperature.

If you need to adjust the temperature in either the refrigerator or freezer compartment, use the settings listed in the chart as a guide.

To Adjust Set Point Temperatures:

The first touch of the (+) or (-) touch pad displays the current temperature set point. The display will show the set point for approximately 3 seconds, and then return to the actual temperature.

Press the (+) or (-) touch pads until the desired temperature set point is displayed.

NOTE: Except when first turning on the refrigerator, do not adjust either temperature control more than one setting at a time. Wait 24 hours between adjustments for the temperature to stabilize.

 

CONDITION/REASON:

ADJUSTMENT:

 

 

 

 

REFRIGERATOR too warm

Adjust REFRIGERATOR

 

 

Control 1° lower

 

 

 

 

FREEZER too warm/too little ice

Adjust FREEZER

 

 

Control 1° lower

 

 

 

 

REFRIGERATOR too cold

Adjust REFRIGERATOR

 

 

Control 1° higher

 

 

 

 

FREEZER too cold

Adjust FREEZER

 

 

Control 1° higher

 

 

 

 

 

 

Additional Digital Control Center Features

Max Cool

The max cool feature assists with periods of high refrigerator use, full grocery loads, or temporarily warm room temperatures.

Press the Max Cool touch pad to set the freezer and refrigerator to the lowest temperature settings. Press the Max Cool touch pad again to return to the normal refrigerator set point.

NOTE: The Max Cool feature will automatically shut off in approximately 12 hours.

11

Page 11
Image 11
KitchenAid W10137649AS installation instructions Electronic Controls, Digital Controls