Drain Requirements

A new drain hose is supplied with your dishwasher. If drain hose is not long enough, use a new drain hose with a maximum length of 12 ft (3.7 m) (Part Number 3385556) that meets all current AHAM/IAPMO test standards, is resistant to heat and detergent, and fits the 1" (2.5 cm) drain connector of the dishwasher.

Make sure to connect drain hose to waste tee or disposer inlet above drain trap in house plumbing and 20" (50.8 cm) minimum above the floor. It is recommended that the drain hose either be looped up and securely fastened to the underside of the counter, or be connected to an air gap.

Make sure to use an air gap if the drain hose is connected to house plumbing lower than 20" (50.8 cm) above subfloor or floor.

If required, the air gap should be installed in accordance with the air gap installation instructions. When you are connecting the air gap, a rubber hose (not provided) will be needed to connect to the waste tee or disposer inlet.

Water Supply Requirements

A hot water line with 20 to 120 psi (138 to 862 kPa) water pressure can be verified by a licensed plumber.

120°F (49°C) water at dishwasher.

³⁄₈" O.D. copper tubing with compression fitting or flexible braided water supply line (Part Number 4396897RP). NOTE: ¹⁄₂" minimum plastic tubing is not recommended.

A 90° elbow with ³⁄₄" hose connection with rubber washer (Part Number W10273460).

Do not solder within 6" (15.2 cm) of the water inlet valve.

Electrical Requirements

Be sure that the electrical connection and wire size are adequate and in conformance with the National Electrical Code, ANSI/NFPA 70 - latest edition and all local codes and ordinances.

A copy of the above code standards can be obtained from:

National Fire Protection Association 1 Batterymarch Park

Quincy, MA 02169-7471

You must have:

120-volt, 60 Hz, AC-only, 15- or 20-amp, fused electrical supply.

Copper wire only.

We recommend:

A time-delay fuse or circuit breaker.

A separate circuit.

If connecting dishwasher with a power supply cord:

Use UL Listed power supply cord kit (Part Number 4317824) marked for use with dishwasher.

Power supply cord must plug into a grounded

3 prong outlet, located in the cabinet next to the dishwasher opening. Outlet must meet all local codes and ordinances.

If connecting dishwasher with direct wiring:

Use flexible, armored or nonmetallic

sheathed, copper wire with grounding wire that meets the wiring requirements for your home and local codes and ordinances.

Use a UL Listed/CSA Approved strain relief.

6

Page 6
Image 6
KitchenAid W10321621D installation instructions Drain Requirements, Water Supply Requirements, Electrical Requirements

W10321621D specifications

The KitchenAid W10321621D is a remarkable refrigerator designed to bring efficiency and style into your kitchen. Known for its innovative features, this appliance is a perfect addition for anyone looking to enhance their culinary space.

One of the standout features of the W10321621D is its spacious interior. With multiple adjustable shelves, this refrigerator allows you to customize the organization of your groceries. Whether you have tall bottles or large platters, the flexible shelving system ensures you can fit everything with ease.

In addition to its ample storage, the W10321621D incorporates advanced cooling technologies to maintain optimal food freshness. The refrigerator utilizes a dual cooling system that independently manages the temperature and humidity in the fridge and freezer compartments. This prevents the transfer of odors between the two sections and helps keep fruits and vegetables crisp for longer periods.

Another technologically advanced aspect of this refrigerator is its smart temperature management system. Equipped with precise temperature controls, the W10321621D ensures consistent cooling performance, adapting quickly to changes in the environment or internal temperatures, thus safeguarding your food’s freshness and quality.

The exterior of the W10321621D is designed with both aesthetics and practicality in mind. Its sleek stainless-steel finish not only complements a wide range of kitchen styles but is also resistant to fingerprints and smudges, making maintenance easier. The integrated water and ice dispenser in the door adds convenience, providing filtered water and ice on demand without opening the fridge.

For added user convenience, the refrigerator features LED interior lighting, illuminating every corner of the fridge and freezer. This ensures you can easily find what you need, even in dimly lit conditions.

Energy efficiency is another key characteristic of the KitchenAid W10321621D. With an ENERGY STAR certification, this model is designed to reduce energy consumption without compromising performance. This sustainability feature not only saves on utility bills but also contributes to eco-friendly living.

In summary, the KitchenAid W10321621D combines a spacious layout, advanced cooling technologies, stylish design, and energy efficiency, making it a top choice for modern kitchens. Its thoughtful features cater to food organization, freshness, and convenience, ensuring it meets the needs of today’s consumers and enhances their cooking experience.