Temp Alarm

The TempAlarm feature alerts you if the temperature exceeds normal operating temperatures, for an hour or longer, in either or both the refrigerator and freezer compartments. An audible alarm will sound repeatedly and the highest temperature reached in each compartment will be displayed.

NOTE: Touch any pad on the control panel to turn off the audible alarm. Temp Alarm will automatically reset once the warm condition has been corrected for 30 minutes.

1.On the main menu, press the touch pad next to “Options.”

2.In each of the following screens, continue to press the touch pad next to “More Options” until “Temp Alarm Is Off” appears on the display.

3.Press the touch pad next to “Temp Alarm Is Off” to switch between ON and OFF. Press the touch pad next to “Done” to lock in the desired setting and return to the main menu.

Replace H2O Filter

See “Water Filtration System.”

User Settings

The control center allows you to set user preferences, if desired.

Language

The language preference allows you to change the control panel display to English, French or Spanish.

1.On the main menu, press the touch pad next to “User Settings.”

2.Press the touch pad next to “Select Language.”

3.Press the touch pad next to either “Mettre En Français” or “Cambiar En Español.” Press the touch pad next to “Confirm” to lock in the setting and return to the main menu.

Temperature Display

The temperature display preference allows you to change the control panel display from degrees Fahrenheit to degrees Celsius.

1.On the main menu, press the touch pad next to “User Settings.”

2.Press the touch pad next to “Fahrenheit Is On” to switch between Fahrenheit and Celsius. Press the touch pad next to “Done” to lock in the desired setting and return to the main menu.

Display Brightness

The Display Brightness preference adjusts the backlight level of the control panel.

1.On the main menu, press the touch pad next to “User Settings.”

2.In each of the following screens, continue to press the touch pad next to “More Settings” until “Display Brightness” appears on the display.

3.Press the touch pad next to “Lighter” or “Darker” to adjust the setting between 1 (darkest) and 5 (lightest). Press the touch pad next to “Done” to lock in the desired setting and return to the main menu.

Adjust Light Sensor

The “Adjust LiteSensor” preference allows you to adjust the level at which the Light Sensor will detect darkness and activate the Auto On mode for the dispenser light.

1.On the main menu, press the touch pad next to “User Settings.”

2.In each of the following screens, continue to press the touch pad next to “More Settings” until “Adjust LiteSensor” appears on the display.

3.Press the touch pad next to “Lighter” or “Darker” to adjust the setting between 1 (darkest) and 9 (lightest). Press the touch pad next to “Done” to lock in the desired setting.

Alarm Sound

The alarm sound preference allows you to turn off any audible alarms (door open, too warm etc.) when quick and simple remedies are not possible. It will not disable alarm features or visual displays.

1.On the main menu, press the touch pad next to “User Settings.”

2.In each of the following screens, continue to press the touch pad next to “More Settings” until “Alrm Sound Is On” appears on the display.

3.Press the touch pad next to “Alrm Sound Is On” to switch between ON and OFF. Press the touch pad next to “Done” to lock in the desired setting and return to the main menu.

Crisper Humidity Control

You can control the amount of humidity in the moisture-sealed crisper. Depending on your model, adjust the control to any setting between FRUIT and VEGETABLES or LOW and HIGH.

FRUIT/LOW (open) for best storage of fruits and vegetables with skins.

VEGETABLES/HIGH (closed) for best storage of fresh, leafy vegetables.

Ice Maker and Ice Storage Bin

IMPORTANT:

Flush the water system before turning on the ice maker. See “Water and Ice Dispenser.”

The ice maker and storage bin are located in the upper left- hand side of the refrigerator compartment.

Turning the Ice Maker On/Off

The On/Off switch is located on the ice maker.

To turn on the ice maker, press the switch to the ON position.

To manually turn off the ice maker, press the switch to the OFF position.

NOTE: Your ice maker has an automatic shutoff. The ice maker sensors will automatically stop ice production, but the control will remain in the ON position.

Removing and Replacing Ice Storage Bin

To Remove the Ice Storage Bin:

1.Hold the base of the storage bin and press the release button on the lower right.

2.Pull the storage bin out until resistance is felt. Lift up the front of the ice bin and remove.

3.Press the switch to the OFF position

To Replace the Ice Storage Bin:

IMPORTANT: It may be necessary to turn the auger driver, behind the ice bin, counterclockwise to properly align the ice bin with the auger driver. The ice storage bin must be locked in place for proper ice dispensing.

1.Press the switch to the ON position

2.Slide the ice bin into the guide rails located on either side of the enclosure.

10

Page 10
Image 10
KitchenAid W10329364A installation instructions Crisper Humidity Control, Ice Maker and Ice Storage Bin

W10329364A specifications

The KitchenAid W10329364A is a vital accessory designed specifically for KitchenAid stand mixers, enhancing their versatility and expanding their functionality. This attachment exemplifies the brand's commitment to innovation and quality, making it a popular choice among home cooks and professional chefs alike.

One of the standout features of the W10329364A is its ability to streamline food preparation processes. This attachment is particularly known for its efficient chopping and slicing capabilities. Equipped with sharp stainless-steel blades, it can handle a variety of ingredients, from vegetables to fruits, ensuring consistent results every time. The attachment's design allows for precise control over the thickness and texture of the sliced items, making it ideal for crafting everything from salads to garnishes.

A significant technological advancement of the KitchenAid W10329364A is its compatibility with all KitchenAid stand mixers. This seamless integration means that users can easily attach and detach the unit as needed, significantly reducing prep time in the kitchen. The ability to use the power of a stand mixer for other tasks eliminates the need for multiple kitchen appliances, making it a space-saving solution.

The KitchenAid W10329364A also boasts an ergonomic design that enhances user experience. It includes a food pusher that guides ingredients safely into the blades, minimizing waste and maximizing efficiency. The attachment is crafted from high-quality materials, ensuring durability and reliability over time, even with regular use in a busy kitchen.

Maintenance of the W10329364A is straightforward, as most parts are dishwasher safe, allowing for easy cleanup after food preparation. This convenience appeals to those who value efficiency and want to ensure their kitchen remains tidied up after cooking.

In conclusion, the KitchenAid W10329364A is a powerful and efficient accessory that transforms the capabilities of KitchenAid stand mixers. With its precise slicing and chopping features, compatibility with stand mixers, and user-friendly design, it is an essential tool for anyone looking to elevate their culinary skills. Whether you are a novice cook or a seasoned chef, this attachment can save you time and enhance the creativity of your meal preparations.