Changing the Light Bulb

NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to replace the bulb with an appliance bulb of the same size, shape, and wattage (no greater than 40 watts).

1.Unplug refrigerator or disconnect power.

2.Remove the light shield, if necessary.

Top of the refrigerator compartment - Squeeze both sides of the light shield while pulling downward to remove.

Beneath ice storage enclosure (on some models) - Press along upper edge of light shield and roll light shield forward to remove.

3.Replace burned-out bulb(s) with appliance light bulb(s) no greater than 40 watts.

4.Replace the light shield(s) by inserting the tabs on the shield into the liner holes and snap into place.

NOTE: To avoid damaging the light shield, do not force the shield beyond the locking point.

5.Plug in refrigerator or reconnect power.

TROUBLESHOOTING

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)

to possibly avoid the cost of a service call.

In the U.S.A., www.kitchenaid.com In Canada, www.kitchenaid.ca

Refrigerator Operation

The refrigerator will not operate

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Power cord unplugged? Plug into a grounded 3 prong outlet.

Is outlet working? Plug in a lamp to see if the outlet is working.

Household fuse blown or circuit breaker tripped? Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

Are controls on? Make sure the refrigerator controls are on. See “Using the Control(s).”

New installation? Allow 24 hours following installation for the refrigerator to cool completely.

NOTE: Adjusting the temperature controls to coldest setting will not cool either compartment more quickly.

The motor seems to run too much

Your new refrigerator may run longer than your old one due to its high-efficiency compressor and fans. The unit may run even longer if the room is warm, a large food load is added, doors are opened often, or if the doors have been left open.

The refrigerator seems noisy

Refrigerator noise has been reduced over the years. Due to this reduction, you may hear intermittent noises from your new refrigerator that you did not notice from your old model. Below are listed some normal sounds with explanations.

Buzzing - heard when the water valve opens to fill the ice maker

Pulsating - fans/compressor adjusting to optimize performance

Hissing/Rattling - flow of refrigerant, movement of water lines, or from items placed on top of the refrigerator

Sizzling/Gurgling - water dripping on the heater during defrost cycle

Popping - contraction/expansion of inside walls, especially during initial cool-down

Water running - may be heard when ice melts during the defrost cycle and water runs into the drain pan

Creaking/Cracking - occurs as ice is being ejected from the ice maker mold.

13

Page 13
Image 13
KitchenAid W10329364A installation instructions Troubleshooting, Changing the Light Bulb, Refrigerator Operation

W10329364A specifications

The KitchenAid W10329364A is a vital accessory designed specifically for KitchenAid stand mixers, enhancing their versatility and expanding their functionality. This attachment exemplifies the brand's commitment to innovation and quality, making it a popular choice among home cooks and professional chefs alike.

One of the standout features of the W10329364A is its ability to streamline food preparation processes. This attachment is particularly known for its efficient chopping and slicing capabilities. Equipped with sharp stainless-steel blades, it can handle a variety of ingredients, from vegetables to fruits, ensuring consistent results every time. The attachment's design allows for precise control over the thickness and texture of the sliced items, making it ideal for crafting everything from salads to garnishes.

A significant technological advancement of the KitchenAid W10329364A is its compatibility with all KitchenAid stand mixers. This seamless integration means that users can easily attach and detach the unit as needed, significantly reducing prep time in the kitchen. The ability to use the power of a stand mixer for other tasks eliminates the need for multiple kitchen appliances, making it a space-saving solution.

The KitchenAid W10329364A also boasts an ergonomic design that enhances user experience. It includes a food pusher that guides ingredients safely into the blades, minimizing waste and maximizing efficiency. The attachment is crafted from high-quality materials, ensuring durability and reliability over time, even with regular use in a busy kitchen.

Maintenance of the W10329364A is straightforward, as most parts are dishwasher safe, allowing for easy cleanup after food preparation. This convenience appeals to those who value efficiency and want to ensure their kitchen remains tidied up after cooking.

In conclusion, the KitchenAid W10329364A is a powerful and efficient accessory that transforms the capabilities of KitchenAid stand mixers. With its precise slicing and chopping features, compatibility with stand mixers, and user-friendly design, it is an essential tool for anyone looking to elevate their culinary skills. Whether you are a novice cook or a seasoned chef, this attachment can save you time and enhance the creativity of your meal preparations.