13
Removable Top Rack (for SatinGlide® Max rails) The removable top rack
allows you to wash
larger items such as
pots, roasters, and
cookie sheets in the
bottom rack.
IMPORTANT: Remove
dishes prior to removing
the top rack from the
dishwasher.
To remove the rack:To gain access to the
removable tabs on the
tracks/rails, pull the
upper rack forward about halfway out of the tub.
On one side, press the tab on the track in and pull up the front end
of the rack out of the track. Then repeat this step on the other side
to completely remove the front end of the rack.
Then remove the back end of the rack, by pulling the back end out
with a slightly forward, and then upward motion.
To replace the rack:Pull the tracks forward about halfway out of the tub.
Along the sides of the racks are round attachment tabs. Align the
rack's back end attachment tabs with the cutout in the track. Push
down into place.
Pull the tracks completely out, and align the rack's front end
attachment tabs with the cutout in the track. Push down into place.
You will hear a snap when the front end of the rack is secured into
place on each side.
Removable Culinary Tool Rack (3rd level rack)The removable culinary tool
rack (3rd level rack) allows
you to wash larger items in
the upper rack, or remove
both the culinary tool rack
and top rack to wash larger
times in the lower rack. See
“Removable Top Rack”
section.
To remove the rack:
1. To access track stops,
pull the rack forward until it stops and clicks into place.
2. To open track stops, flip the track stop to the outside of the
track.
3. After opening both track stops, slide front wheels up and out
of the slot in track. Continue to pull rack forward in track and
slide the back wheels up and out of the track.
4. Close track stops.
5. Slide rack tracks back into dishwasher.
To replace the rack:
1. Gently pull rack tracks forward in dishwasher until they stop
and click into place.
2. To open track stops, flip the track stop to the outside of the
track.
3. Place the back rack rollers on each side of the rack into the
track slot and roll the rack back into the tracks.
4. Insert front rack rollers on each side of the rack into the rack
slots.
5. Close track stops on both sides of rack and slide rack back
into dishwasher.
Culinary Tool Rack (3rd level rack)The culinary tool rack is designed with 2 movable baskets to hold
extra silverware, knives and cooking utensils.
Install the baskets in this up position when you have extra
silverware and flatware to wash.
Install the baskets in this down position when you have extra
silverware, knives, or utensils requiring more room to w ash.
IMPORTANT: When you are using the culinary tool baskets in the
down position, the top rack must also be in the lowest position.
Remove the front basket in the down position, when you are using
the cup shelves or other tall items in the top rack for more room.
A
B
A. Track stop
B. Track
Up position
Down position