Inset Installation Dimensions

1.Measure the distance from point A (as shown) to the back wall. Add ¹⁄₃₂" (0.8 mm) to this measurement to allow the side panel to fit into the trim.

2.If the panel is more than ³⁄₈" (9.5 mm) thick, route the front edge to allow the side panel to fit into the trim.

A

Recessed Inset Installation Dimensions

1.Measure the distance from point A (as shown) to back wall.

2.Route the front edge of the support board or attach a ³⁄₈" (9.5 mm) board to hold the panel in the cabinet side trim.

A

INSTALLATION

INSTRUCTIONS

Unpack the Refrigerator

WARNING

Tip Over Hazard

Refrigerator is top heavy and tips easily when not completely installed.

Keep doors taped closed until refrigerator is completely installed.

Use two or more people to move and install refrigerator.

Failure to do so can result in death or serious injury.

IMPORTANT:

Do not remove the film covering until the refrigerator is in its operating location.

All four leveling legs must contact the floor to support and stabilize the full weight of the refrigerator.

Keep the cardboard shipping piece or plywood under the refrigerator until it is installed in the operating location.

1.Remove and save the literature package bag taped to the side of the refrigerator and the parts bag behind the grille. Remove the four brackets (two on each side) that attach the shipping base to the refrigerator bottom.

NOTE: Do not remove tape and door bracing until the refrigerator is in its final location.

2.If necessary, reduce the tipping radius. See “Tipping Radius” for ceiling height requirements or “Reduce Tipping Radius” for step-by-step instructions. If you do not need to reduce the tipping radius, proceed to “Move the Refrigerator into House.”

Reduce Tipping Radius

(if required)

Before bringing the refrigerator into the home, be sure there is adequate ceiling height to stand the refrigerator upright. See “Tipping Radius” in the “Installation Requirements” section for more information.

If you do not have adequate ceiling height to stand the refrigerator upright, the tipping radius can be reduced by removing the top grille and side trims (see the following chart).

Model Reduced Tipping Radius

3689" (225.9 cm)

4290¹⁄₂" (229.9 cm)

4891¹⁄₄" (231.8 cm)

1.Grasp both ends of the top grille.

2.Push the top grille straight up; then pull straight out. Lay the grille on a soft surface.

BAB

A. Top grille

B. Cabinet side trim

3.Remove the six screws attaching each cabinet side trim to the refrigerator and remove the side trims.

15

Page 15
Image 15
KitchenAid W10681447A manual Installation Instructions, Unpack the Refrigerator, Reduce Tipping Radius

W10681447A specifications

The KitchenAid W10681447A is a versatile and highly efficient dishwasher designed to meet the demands of modern kitchens. Renowned for its superior cleaning capabilities, this appliance brings together cutting-edge technology, thoughtful design, and an array of features tailored to enhance the user experience.

One of the standout features of the W10681447A is its advanced cleaning system. Equipped with a powerful wash system that utilizes a combination of spray patterns and high-pressure jets, this dishwasher ensures that even the toughest dirt and grease are effectively removed. The soil sensor technology automatically adjusts the wash cycle based on the level of dirt detected, ensuring optimal cleaning performance every time.

Another key characteristic is the adjustable upper rack that provides added flexibility when loading dishes. This feature allows users to accommodate taller items in both the lower and upper racks, maximizing the dishwasher's capacity. The dishwasher also boasts a third-level rack, providing extra space for utensils and small items, which ensures that every inch of the appliance is utilized efficiently.

The W10681447A emphasizes quiet operation, featuring a sound-dampening system that includes a motor sound insulation blanket and sound-reducing materials. With a noise level of just 47 dBA, it is one of the quietest models on the market, allowing you to run it anytime without disturbing your household.

In terms of energy efficiency, the KitchenAid W10681447A is designed to minimize water and energy usage without compromising on performance. It is ENERGY STAR certified, which means it meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. This not only benefits the environment but also saves users on utility bills.

The dishwasher comes with a variety of wash cycles and options, including heavy, normal, and quick wash cycles, as well as specialized settings for pots and pans. Additionally, it features a Delay Start option, allowing users to schedule the washing cycle at their convenience.

Overall, the KitchenAid W10681447A exemplifies excellence in design and functionality. With its powerful performance, innovative features, and quiet operation, it is an ideal choice for homeowners seeking a dependable and efficient dishwasher that can handle the rigors of everyday cooking and entertaining.