1.Use a ⁵⁄₁₆" socket driver to turn the leveling bolts clockwise to extend the legs to the floor as shown. The rollers should be off the floor.

A B

A

B

A. Rear leveling bolt

B. Front leveling bolt

2.Adjust the leveling legs to level and align the refrigerator from left to right and front to back so that the refrigerator is level and aligned with the cabinetry. The cabinetry surface must be plumb for the ideal fit of the refrigerator side trim.

3.Continue adjusting all of the leveling legs to raise the refrigerator until the top is within at least 1" (2.54 cm) of the top soffit.

NOTE: If an anti-tip board has been used, adjust the leveling legs until the top of the refrigerator is within ¹⁄₄" (6.35 mm) of the bottom of the anti-tip board as shown. Do not crush the compressor cover.

A B

C

¹⁄₄" (6 mm) max.

2" (5 cm)

D

A. Center board ¹⁄₄" (6.35 mm) max. above refrigerator

B. 2" x 4" x 32" (5 cm x 10 cm x 81 cm) boards (2)

C. Attach to studs with six #8 x 3" (7.6 cm) screws

D. Compressor cover

IMPORTANT: Adjust in small increments to keep from damaging the cabinet trim and causing problems with the door alignment or top grille fit. To avoid damage to the cabinet or leveling legs, do not apply more than

50 inch-pounds (5.65 Nm) of torque to the leveling bolts. The leveling legs can be extended to a maximum of 1¹⁄₄" (3.18 cm) below the rollers.

4.For Overlay models, additional adjustments may be needed after the custom panels are installed.

Install Overlay Series Custom Panels

IMPORTANT:

■Install the custom handles prior to installing the panels on the refrigerator. For more information on KitchenAid custom handle selection, refer to the KitchenAid Catalog, visit www.kitchenaid.com, or call 1-800-442-9991. In Canada, visit www.KitchenAid.ca, or call 1-800-807-6777.

■Create custom door overlay panels according to the specifications in the “Overlay Series Custom Panels” section.

■KitchenAid is not responsible for the removal or addition of molding or decorative panels that would not allow access to the refrigerator for service.

Door Panel Installation

1.Remove all tape and door bracing from the refrigerator and freezer doors.

2.Open the refrigerator and freezer compartment doors.

3.Remove the handle-side and top trims.

A

A

 

A.Trims

4.Slide the custom panels into the bottom and hinge side trims on the refrigerator compartment and freezer compartment doors, making sure that the backer panel fits into the hinge side trims.

AA

A. Panels

19

Page 18 Page 20
Page 19
Image 19
KitchenAid W10681447A manual Install Overlay Series Custom Panels, Door Panel Installation
Page 18 Page 20

W10681447A specifications

The KitchenAid W10681447A is a versatile and highly efficient dishwasher designed to meet the demands of modern kitchens. Renowned for its superior cleaning capabilities, this appliance brings together cutting-edge technology, thoughtful design, and an array of features tailored to enhance the user experience.

One of the standout features of the W10681447A is its advanced cleaning system. Equipped with a powerful wash system that utilizes a combination of spray patterns and high-pressure jets, this dishwasher ensures that even the toughest dirt and grease are effectively removed. The soil sensor technology automatically adjusts the wash cycle based on the level of dirt detected, ensuring optimal cleaning performance every time.

Another key characteristic is the adjustable upper rack that provides added flexibility when loading dishes. This feature allows users to accommodate taller items in both the lower and upper racks, maximizing the dishwasher's capacity. The dishwasher also boasts a third-level rack, providing extra space for utensils and small items, which ensures that every inch of the appliance is utilized efficiently.

The W10681447A emphasizes quiet operation, featuring a sound-dampening system that includes a motor sound insulation blanket and sound-reducing materials. With a noise level of just 47 dBA, it is one of the quietest models on the market, allowing you to run it anytime without disturbing your household.

In terms of energy efficiency, the KitchenAid W10681447A is designed to minimize water and energy usage without compromising on performance. It is ENERGY STAR certified, which means it meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. This not only benefits the environment but also saves users on utility bills.

The dishwasher comes with a variety of wash cycles and options, including heavy, normal, and quick wash cycles, as well as specialized settings for pots and pans. Additionally, it features a Delay Start option, allowing users to schedule the washing cycle at their convenience.

Overall, the KitchenAid W10681447A exemplifies excellence in design and functionality. With its powerful performance, innovative features, and quiet operation, it is an ideal choice for homeowners seeking a dependable and efficient dishwasher that can handle the rigors of everyday cooking and entertaining.
Top Page Image Contents