KitchenAid xgcd807x dimensions 30 76.2 CM GAS Downdraft Cooktop, 30 76.2 cm Cooktop

30" (76.2 CM) GAS DOWNDRAFT COOKTOP

PRODUCT MODEL NUMBERS

KGCD807X

GAS SUPPLY REQUIREMENTS

Type of Gas

Natural Gas:

This cooktop is design-certified by CSA International for use with Natural gas or, after proper conversion, for use with LP gas.

●This cooktop is factory set for use with Natural gas. If converting to LP gas, see the “LP Gas Conversion” instructions provided in the package containing literature. The model/serial rating plate located on the underside of the cooktop base has information on the types of gas that can be used. If the types of gas listed do not include the type of gas available, check with the local gas supplier.

LP Gas Conversion:

Conversion must be done by a qualified service technician.

No attempt shall be made to convert the cooktop from the gas specified on the model/serial rating plate for use with a different gas without consulting the serving gas supplier. See the Gas Conversion instructions provided in the package containing literature.

Gas Supply Line

●Provide a gas supply line of ³⁄₄" (1.9 cm) rigid pipe to the cooktop location. A smaller size pipe on longer runs may result in insufficient gas supply. Pipe-joint compounds that resist the action of LP gas must be used. Do not use TEFLON®† tape. With LP gas, piping or tubing size should be ¹⁄₂" minimum. Usually, LP gas suppliers determine the size and materials used in the system.

Flexible metal appliance connector:

●If local codes permit, use a ¹⁄₂" or ³⁄₄" I.D. flexible stainless steel tubing gas connector, designed by CSA to connect the cooktop to the rigid gas supply line.

Rigid pipe connection:

The rigid pipe connection requires a combination of pipe fittings to obtain an in- line connection to the cooktop. The rigid pipe must be level with the cooktop connection. All strains must be removed from the supply and fuel lines so cooktop will be level and in line.

●Must include a shutoff valve:

The supply line must be equipped with a manual shutoff valve. This valve should be located in the same room but external to the cooktop opening, such as an adjacent cabinet. It must be accessible without removing the cooktop, and it should be in a location that allows ease of opening and closing. Do not block access to shutoff valve. The valve is for turning on or shutting off gas to the cooktop.

B

A

C

A. Gas supply line

B. Shutoff valve “open” position

C. To cooktop

†®TEFLON is a registered trademark of E.I. Du Pont De Nemours and Company.

CUTOUT DIMENSIONS

AB

D

C

E

F

H

I

J

G

A. 28⁵⁄₈" (72.7 cm) maximum

B. 19¹⁵⁄₁₆" (50.6 cm) maximum

C.9⁵⁄₁₆" (21.6 cm)

D.6⁴⁹⁄₆₄" (17.2 cm)

E. 2¹⁄₈" (5.4 cm) minimum space to front edge of cooktop F. Floor exhaust option

G.6¹⁄₈" (15.6 cm) for 6" (15.2 cm) vent system and 5¹⁄₈" (13.1 cm) for 5" (12.7 cm) vent system

H.9⁵⁄₁₆" (21.6 cm)

I.13³⁄₈" (33.9 cm) from the top of the countertop surface J. Wall exhaust option

PRODUCT DIMENSIONS

30" (76.2 cm) Cooktop

A

B

C

A. 21³⁷⁄₆₄ " (54.8 cm) with stainless steel trim or 21½" (54.6 cm) without stainless steel trim

B. 19⁴⁷⁄₆₄" (50.1 cm) screw head to screw head C. Model/serial rating/clearance plate location

Page 1 of 2

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation	Ref. W10526087A
Instructions packed with product. Specifications subject to change without notice.	5/6/13