KitchenAid xgcd807x dimensions Product Dimensions, Cabinet Dimensions, Fg N

PRODUCT DIMENSIONS (cont.)

CABINET DIMENSIONS

A

B

C

D

E

G

H

J

F

I

A

D

C B

L E FG N

H

M IK

KJ

M

A. 29¹⁵⁄₁₆" (76.1 cm) without stainless steel trim

B. 30¹⁄₃₂" (76.3 cm) with stainless steel trim

C. 12²⁹⁄₆₄" (31.6 cm) centerline of cooktop to centerline of gas manifold pipe

D. 7⁵⁄₁₆" (18.6 cm) E. 3³⁹⁄₆₄" (9.2 cm)

F. 15" (38.1 cm)

G. 2⁵⁄₃₂" (5.5 cm) recommended minimum cabinet to motor clearance

H. 14¹¹⁄₃₂ " (36.4 cm)

I. 11⁴⁹⁄₆₄ " (29.9 cm)

J. 28³⁄₈" (72.1 cm) screw head to screw head

A. 30" (76.2 cm)

B. Combustible area above countertop (shown by dashed box above)

C. 30" (76.2 cm) minimum clearance between top of cooktop platform and bottom of uncovered wood or metal cabinet (24" [61.0 cm] minimum clearance if bottom of wood or metal cabinet is covered by not less than ¼" [0.6 cm] flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" [0.04 cm] stainless steel, or 0.024" [0.06 cm] aluminum or 0.020" [0.05 cm] copper)

D. 13" (33.0 cm) recommended upper cabinet depth

E.2¹⁄₈" (5.4 cm)

F.19¹⁵⁄₁₆" (50.6 cm)

G.18" (45.7 cm) minimum clearance from upper cabinet to countertop within minimum horizontal clearances to cooktop

H.Junction box or outlet; 12" (30.5 cm) minimum from bottom of countertop

I.Junction box or outlet; 10" (25.4 cm) from right-hand side of cabinet

J.28⁵⁄₈" (72.7cm) on 30" (76.2 cm) models

K.8" (20.3 cm) minimum distance to nearest left and right side combustible surface above cooktop

L.2" (5.1 cm) minimum clearance between back wall and countertop

M.Gas line opening - Wall: anywhere 6" (15.2 cm) below underside of

countertop on the left side. Cabinet floor: anywhere within 6" (15.2 cm) of rear wall on the left side is recommended.

N.25" (63.5 cm) depth of countertop

NOTES: After making the countertop cutout, some installations may require notching down the base cabinet side walls to clear the cooktop base. To avoid this modification, use a base cabinet with sidewalls wider than the cutout.

●A minimum side clearance of 6" (15.2 cm) is recommended between side of cooktop and side wall for maximum ventilation performance.

●A minimum clearance of 2" (5.1 cm) is recommended between the motor/blower and cabinet for proper cooling. A 6" (15.2 cm) clearance is recommended for servicing access.

		Page 2 of 2
Because Whirlpool Corporation policy includes a continuous commitment to improve	Dimensions are for planning purposes only. For complete details, see Installation	Ref. W10526087A
our products, we reserve the right to change materials and specifications without notice.	Instructions packed with product. Specifications subject to change without notice.	5/6/13