Klipsch Bookshelf Speaker owner manual Important Safety Instructions, Unpacking, Placement

REFERENCE SERIES

IMPORTANT SAFETY INSTRUCTIONS

1.READ these instructions.

2.KEEP these instructions.

3.HEED all warnings.

4.FOLLOW all instructions.

5.DO NOT use this apparatus near water .

6.CLEAN ONLY with dry cloth.

7.DO NOT block any ventilation openings.Install in accordance with the manufacturer's instructions.

8.DO NOTinstall near any heat sources such as radiators,heat registers,stoves,or other apparatus (including amplifiers) that produce heat.

9.DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.PROTECT the power cord from being walked on or pinched,particularly at plugs,conve- nience receptacles,and the point where they exit from the apparatus.

11.ONLY USE attachments/accessories specified by the manufacturer.

12.USE only with a cart,stand,tripod,bracket,or table specified by the manufacturer, or sold with the apparatus.When a cart is used,use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13.UNPLUG this apparatus during lightning storms or when unused for long periods of time.

14.REFER all servicing to qualified service personnel.Servicing is required when the apparatus has been damaged in any wa y, such as power-supply cord or plug is damaged,liquid has been spilled or objects have fallen into the apparatus,the apparatus has been exposed to rain or moisture,does not operate normally, or has been dropped.

UNPACKING

The easiest way to remove the speaker from its carton is to turn the open end of the box down so that it is resting on a table or the floor, with the flaps spread out and away. Then pull the box straight up and off. Remove any packing material from the speaker and grille, place it back in the carton, and store in case you ever need to ship the loudspeaker. Attach the dome-shaped self-stick pads on the bottom of the cabinet for shelf protection. (See Figure 1.) Align the magnetic posts on the inside of the grille with the screws on the front of the speaker, and it will snap into place.

Figure 1

PLACEMENT

Although your Reference Series speakers will perform well in a wide variety of locations,you will get the most out of them by following some simple guidelines:

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.

This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.

WARNING: To reduce the risk of fire or electrical shock,do not expose this apparatus to rain or moisture.

RISKOFELECTRICSHOCK

DONOTOPEN

WARNING: Voltages in this equipment are hazardous to life.No user-serviceable parts inside. Refer all servicing to qualified service personnel.

CAUTION: Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate.

ABOUT YOUR KLIPSCH PURCHASE

Thank you for your purchase of Klipsch bookshelf loudspeakers.After reading this manual and connecting your system,you will hear the result of over 55 years of stringent engineering and class-leading research and development.Like all Klipsch products,your bookshelf loudspeakers feature Klipsch Tractrix® Horn-loaded Technology—the guiding design for the first Klipschorn ® developed in 1946 and for every product that has followed.Horn-loading allows your speakers to deliver high sensitivity, low distortion, flat frequency response and wide dispersion,which translates to unequaled power, detail and dynamics,the hallmarks of “The Klipsch Sound.” Please be sure to fill out the warranty card at the back of this manual or online at www.klipsch.com so we are better able to serve you.Again,thank you for choosing Klipsch and we hope that your speakers bring life to your music and movies for many years.

•Place the front left and right speakers on shelves or stands with their tweeters at approximately ear height for a seated listener. Used as surround-channel speakers,they usually perform best when placed slightly higher than that.

•If you are installing your speakers in a cabinet,place them so their fronts are at least flush with the cabinet’s front.

•If possible,arrange both speakers so that they are equal distances from the floor and the wall behind them.It can also help to have the left and right speakers at different distances from their nearest side walls.This sort of staggering helps smooth the bass range.

•Any speaker’s bass output and response is strongly influenced by its distance from room boundaries,such as walls and the floor. Moving a speaker closer to a room boundary will increase its bass output,while moving it away will reduce the bass.Following the suggestions above will typically yield good results with Klipsch Reference Series bookshelf speakers,but you may find that you can “fine-tune”the sound by moving them slightly from side to side or front to back until music recordings with strong bass content sound just right to you.Don’t be afraid to experiment.

Figure 2