Never before has Klipsch offered such premium performance in an in-wall speaker. You’ll discover it delivers effortless dynamic range and brings superior sound to larger rooms thanks to its highly regarded THX Select2 certification.
The KL-6504-THX employs four high- output 5.25-inch fiberglass woofers for powerful bass impact, while a 1-inch tita- nium tweeter mated to a new symmetrical pattern 90 x 90 square Tractrix® Horn generates flat in-room frequency response with high efficiency and low distortion. This exclusive horn design also allows the speaker to consistently deliver unbeatable sound, whether it’s installed horizontally or vertically.
The KL-6504-THX’s titanium horn-loaded tweeter is mated to the woofers using precision-voiced, high-definition crossover networks, creating high sensitivity. This makes the speaker easier to drive, so it requires a lot less amplification power than conventional designs.
Adding to its first-class sound, the KL-6504- THX also has a premium look and feel with its grille off, featuring a deluxe MDF baffle with aluminum fascia. But when covered, the speaker’s paintable grille allows it to blend in perfectly with any home décor. All-new sure-grip mounting dogs offer even pressure against drywall for long-term instal- lation reliability.
Furthermore, the KL-6504-THX comes with a lot of options. It is timbre matched to all of our THX-certified products, so you can mix and match for the discreet stereo or home theater system that’s just right for you.
•THX Select2-certified for superior sound
•Horn-loaded for high efficiency and low distortion
•Sized for 42-inch and larger flat-panel TVs
•Easily mounts horizontally or vertically
•Maximum installation reliability
•Mix and match with our other THX products
S p e c i f i c a t i o n s
Bandwidth | 46 Hz - 20 kHz ± 3dB |
| |
Sensitivity | 92 dB |
| |
Nominal Impedance | 4 Ohms |
| |
Cross Over Frequency | 250 Hz & 2100 Hz |
| |
Power Handling | 150 Watts Cont. 600 |
| |
Enclosure Type | Infinite Baffle - Front Flush with Wall |
| |
Drive Components | Two and a half way system utilizing |
| a 1” Titanium tweeter in a 4” 90x90 |
| horn, and Two 5.25” Fiberglass |
| Woofers - THX Certified |
| |
Weight | 18.3 lbs. / 8.3Kg |
| |
Height | 28.5in / 72.4cm |
| |
Width | 8 in / 20.3cm |
| |
Depth | 3.75in / 9.5cm |
| |
Cutout Height | 27.25 in / 69.2cm |
| |
Cutout Width | 6.5 in / 16.5cm |
| |
Material | 0.14 in / 3.5 mm ABS |
| |
Finish | White - Paintable |
www.klipsch.com 1-800-KLIPSCH All specifications are subject to change without notice. ©2008