Connecting the Loudspeakers - 2
The Terminal Panel
As supplied, positive and negative terminals of the high and low frequency terminal pairs are strapped to- gether with a
| Standard Connection |
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
No preparation | Loosen the terminals. |
needed | Remove the straps |
| |
| terminals hand tight |
Standard (Single) Wiring
The straps are left in place as supplied. Connection may be made to any pair of terminals. You will need two loudspeaker cables of equal lengths, one for each loudspeaker.
Partially unscrew one positive and one negative terminal. Connect the positive (+ RED) terminal of the loud- speaker to the striped conductor, or (if you are using custom cable) to the conductor designated by the cable manufacturer. Connect the negative (– BLACK) terminal to the plain conductor. Do not connect the amplifier at this time.
Page 10
HF
AMPLIFIER
Right Speaker
Left Speaker