Thank You
Congratulations on your purchase of the Klipsch Groove PM20 music system. The Groove PM20 is designed to allow you to share the contents of your digital music with the world around you. The Groove PM20 is a stereo sound system incorporating two
Unpack the Box
Unpack the entire contents of the shipping box and make sure you have the following items.
0 | 0 |
Passive Satellite | Control Satellite |
|
|
0 | 0 |
Power Supply | Stereo |
Speaker Placement
1.The two speakers should be positioned on each side of your computer monitor, with the control satellite on the right. (The control speaker has the volume knob on the front.)
2.Avoid running speaker or power cables across an area of foot traffic.
Active Speaker Controls
Push=On |
|
|
|
|
| ||
Volume | |||||||
| |||||||
Push=Standby |
|
|
| =Increase | |||
|
|
|
|
|
| =Decrease | |
LED |
|
|
|
|
| ||
|
|
|
|
| |||
Red=Standby | Push and Hold | ||||||
Blue=On | for Bass Level | ||||||
Flashing Blue=Bass Adjust | Adjustment | ||||||
Purple=Headphone Mode | (LED Flashes When in | ||||||
|
|
|
|
| Bass Adjust Mode) | ||
(Headphones are Connected) |
|
|
Speaker Connection Diagram
1.Do not plug in AC power until system setup is complete.
2.Connect mini plug cable from the control speaker to the primary audio source (computer, iPod®, etc.).
3.Connect RCA speaker cable from passive (left) to the control (active) speaker.
Note: The active speaker plays the right channel, and the passive speaker plays the left channel.
4.Connect DC power supply cable to the DC IN of the control speaker.
5.Plug headphone mini stereo plug into headphone jack, if desired. Note: The speakers will not play while headphones are connected.
6.Plug stereo mini plug into Aux jack. Plug stereo mini plug into MP3 player (for example).
System Volume and Bass Level Controls
The knob located on the front of the right satellite can be used to adjust the system’s volume as well as the bass level of the PM20 system. When the system is “On” and the LED indicator is blue, the knob can be used to adjust the volume of the PM20 system. To adjust the bass level, press and hold the knob for three (3) seconds. The LED indicator will flash blue. While the indicator is flashing blue, the knob can be used to adjust the level of the bass relative to the treble.
Software and Hardware Gain Controls
Software Volume Control in Microsoft Windows
1.Click the Start button on your taskbar
2.Choose Accessories
3.Windows 95: Choose Multimedia
Windows 98/2000: Choose Entertainment
Windows XP: Choose Entertainment
4.Click on the Volume Control
5.Adjust the Wave Volume Elevator Button to 70%
Volume Control Programs
Some soundcard and/or PC manufacturers may have software that must be adjusted separately from the Windows volume control. Consult applicable manual for specific hardware documentation.
2