4
Note: It is very important to use a top quality RJ45 8/8 crimper tool. We strongly suggest using a cat 5 / RJ45 electronic tester to verify the wire conductors.
Introduction: Thank you for your purchase of a Knoll GSZ67 12 channel controller amplifier and congratulations on your choice. The GSZ67 features six deluxe digital volume controlled stereo amplifiers with individual seven source selection. This is Knoll's third generation of
Each of the six zones or rooms can select any of the seven inputs, with individual volume control, bass, treble and balance. Extras such as an external voltage trigger that can turn source equipment on and off, individual zone infrared outputs, a fully balanced paging override, RS232 control, fully buffered line level outputs and many more features give the GSZ67 exceptional value when installed in homes and large complex systems. Except for the power button all controls are rear mounted. A data port is provided for ganging multiple GSZ67's. Infrared signals can be relayed from the keypads to the source equipment.
The GSZ67 is normally controlled by MR164 LCD keypads with or without Knoll remote controls or RS232 commands from whole house controllers. The paging override is normally used for whole house announcements or doorbell chimes.
with seven input source selection. Selection, volume level, bass, treble and balance is made on MR164 keypads, Knoll remote control (or a programmed remote control) or via an external controller. Rooms can have different source selections, volumes, etc.
require a MR164 keypad, RB12 remote control or external controller via RS232. The keypads are typically mounted in the room with the speakers and they control amplifier power on/off, volume up/down and mute as well as source selection.
amplifiers in one
individually and fully protected against low impedance, overheating, overloading, over voltage and under voltage. The protection circuitry automatically restores the amplifier channel as soon as its parameter returns to the safe operating area.
