Knoll Systems MR216 warranty Warranty, Eco-SystemTrigger Instructions

Warranty

Knoll Systems warrants the MR216 sold in the USA and Canada by authorized Knoll dealers to be free of defects in materials and workmanship. This warranty extends for three full years from the date of purchase by the original consumer. Any products returned to Knoll Systems and found to be defective by Knoll Systems within the warranty period will be repaired or replaced at Knoll Systems option, at no charge. Knoll Systems will not be responsible for the actual cost of installation or removal of the product, nor for any incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights. You may have additional legal rights that vary from state-to-state.

Specifications

Trigger Signal	12 VDC 150 mA maximum
Color	Black
Power Requirements	100-240 VAC 50/60 Hz
Power Connector	2.1mm center positive
Dimensions	2-1/2 x 1 x 2-5/8”
	(63 x 26 x 67 mm)
Audio Connectors	Gold RCA Inputs and Outputs
Trigger Connector	Mono 3.5mm

Knoll Systems

145 Tyee Drive Point Roberts, WA 98281 USA

14-7163 Vantage Way, Delta BC V4G 1N1 Canada Tel: (604) 940-1689, fax (855) 734-3363

www.knollsystems.com

MR216

Eco-System™Trigger

Instructions v1.0

Warning: To be installed and/or used in accordance with appropriate electrical codes and regulations.

Description: The Knoll Systems MR216 Eco-System™ Trigger allows amplifiers, subwoofers and other products to be activated or powered on when an audio signal is present. When the audio signal is lost the activation is stopped.

The most important feature of the Eco-System™ circuit in the MR216 is the energy or electrical savings that is delivered to the owner over a period of time. The typical home owner will see a savings of hundreds of dollars or more per year in actual electrical costs and that can be multiplied when taking into account the increased costs of air conditioning the home to extract unwanted heat produced by a products powered up and not in use.