1)If you need to move the cooking range to install the hood, turn off the po range at the main electrical box. SHUT OFF THE GAS BEFORE MOVING A GAS RANGE.
{Fig. 1}
2)Secure mounting screws with plastic anchors (included) to clean wall sur cooking surface leaving about 1/8 of the screw sticking out{Fig. 1a}. height from cooking surface to the range hood bottom is 30. The height without duct cover, is 11 inches.)
{Fig. 1a} |
| {Fig. 1b} |
1/ 8 space | (Adjustable brackets) | for (7) duct |
|
| Opening. |
3)Use screwdriver to loosen mounting brackets at the back of the hood, adju tighten screws (Fig. 1b). Align mounting brackets to the 2 screws on wall into place (Fig. 1c). Tear out & dispose of the template. Make sure protect removed before installing (Fig.1e). CAUTION: MAKE SURE THE HOOD IS SECURE BEFORE RELEASING.
4)After adjusting the Exhaust Duct Cover to the desired to ‰27length),place(14a 1/8short screw (included) through the oval opening and hole on duct cover. This will cover at the desired length (Fig. 2). Remove left or right pop out square l of duct cover for wire outlet access.
{Fig. 2}
4