5)Use 2 long screws (included) to secure the Exhaust Duct Cover Position Pan This will help keep the Exhaust Duct Cover in place. Repeat to secure seco panel for extended portion of duct cover. (Fig. 3a)
Mounting Screws
{Fig. 3}
6)Fasten duct cover to hood by using a short screws (included).Make sure the the plastic receiving end on the hood. Do the same for the other side of (Fig. 3b)
{Fig. 3b} | Screws on both sides |
7)Slide oval oil container into plastic slot behind each safety screen (Fig.3c oil container under each safety screen. Turn
| Round Oil Container |
{Fig. 3c} | {Fig. 3d} |
Oval Oil container |
|
For Installation of Additional KOBE Exhaust Duct Covers (Optional)
If installing additional KOBE Exhaust Duct Cover to extend ‰duct: cover beyond 27
1)Pull out inner section of KOBE Exhaust Duct Cover and remove protective installing. Reinsert the inner duct cover section.
2)Depending on additional length needed, adjust the duct cover tothe desired
to 27‰) and place a short screw (included) through the oblong opening and h cover. This will secure the duct cover at the desired length. Insert th additional two piece duct cover to outer section of included two piece duct with two short screws. (Fig. 4).
5
