Kobe Range Hoods CX1836GS installation instructions Duct Cover Installation

12.Test the operation of the hood before moving on to next step. Make sure powe supplied to the hood.

Duct Cover Installation

13.Using Table 1 and measurements on page 12 for references, mark the leveling p duct cover-mounting bracket.

14.Secure the duct cover-mounting bracket to the wall with two screws (not provi to Figure 10. Make sure all screws are tightened.

15.Hook the inner duct cover onto the duct cover-mounting bracket and release th duct cover to fit onto the hood as shown on Figure 11.

Figure 10 Figure 11

Final Assembly

16.Turn power ON in control panel. Check all lights and blower operation.

17.Make sure to leave this manual for the homeowner.

7