Manuals / Kobe Range Hoods / Household Appliance / Gas Heater

Kobe Range Hoods RA3830SQ To Replace Light Bulb, 4Replace protective cover 5Plug in range hood

Models: RA3830SQ RA3836SQ

1 24
Download 24 pages 57.16 Kb
Page 15
Image 15
To Replace Light Bulb

To Replace Light Bulb

CAUTION: HALOGEN LIGHT UNIT MAY BE HOT! WAIT UNTIL UNIT IS COOL.

1)Make sure all control switches are off, and range hood is unplugged.

2)Use a flat head screwdriver to pop out the protective covering as shown on F

3)Gently pull out the defective light bulb and discard. Light bulbs should b maximum. Refer to Figure 19. Push bulb securely into light socket.

4)Replace protective cover.

5)Plug in range hood.

Figure 18

Figure 19

13

Page 14 Page 16
Page 15
Image 15
Kobe Range Hoods RA3830SQ, RA3836SQ To Replace Light Bulb, 4Replace protective cover 5Plug in range hood
Page 14 Page 16

FAQ

Is it safe to replace the light bulb while the range hood is still plugged in?

No, it's important to ensure the range hood is unplugged and all control switches are off before replacing the light bulb to avoid any electrical hazards.

What type of light bulb should I use for my Kobe Range Hoods gas heater?

It is recommended to use maximum light bulbs for your gas heater. Consult the specifications for further details.

How do I securely push the new light bulb into the socket?

Refer to Figure 19 for visual guidance on how to properly push the new light bulb into the light socket to ensure it is securely in place.