KODAK PROFESSIONAL PLUS-X 125 Film / 125PX • F-4018 7

Push Processing: Roller Transport Processors

To process pushed PLUS-X 125 Film in a machine with

DURAFLO RT Developer, use a normal machine process

with the machine speed shown in the appropriate table

below.

IMAGE STRUCTURE

The data in this section is based on development in KODAK

HC-110 Developer (Dilution B), 70°F (21°C ), 5minutes in

a large tank, with manual agitation at 1-minute intervals.

*
Read at a net diffuse density of 1.0, using a 48-micrometre aperture, 12X
magnification.
EI Machine Speed
KODAK VERSAMAT Film Processor, Models 5 and 411
250/25°4.0 ft (1.2 m)/min (normal)
500/28°3.0 ft (0.9 m)/min
KODAK VERSAMAT Film Processor, Model 11
250/25°8.5 ft (2.6 m)/min (normal)
500/28°6.4 ft (1.9 m)/min
Other Roller-Transport Processors
EI Development Time at
80°F (27°C)
250/25°60 seconds
(normal)
500/28°80 seconds
Resolving Power Diffuse rms
Granularity
*
ISO RPL
TOC 1.6:1) ISO RPL
TOC 1000:1)
50 125 10 (extremely fine)
CURVES
Characteristic Curves
LOG EXPOSURE (lux-seconds)
3.5
0.0
2.5
DENSITY
1.0
3.0
Small Tank
Exposure:
KODAK PROFESSIONAL Developer D-76
Daylight
1.0
Diffuse Visual
20 C (68 F)
2.0
3.0 2.0 1.5 1.0 0.5 0.0 0.5
= 7 minutes
= 11 minutes
= 5 minutes
= 6 minutes
= 11 minutes
= 7 minutes
Diffuse Visual
20 C (68 F)
0.50.00.51.01.52.02.5
2.0
1.0
Daylight
KODAK PROFESSIONAL T-MAX Developer
Exposure:
Small Tank
3.0
1.0
DENSITY
3.0
0.0
3.5
LOG EXPOSURE (lux-seconds)